On going problems with my car purchased from a garage
On going problems with my car purchased from a garage
Author
Discussion

iOversteer

Original Poster:

1,076 posts

210 months

Sunday 12th June 2011
quotequote all
Hi folks,

I was just after a bit of advice really. A month ago I bought (yes bought, not fking brought) a 2001 Vw Lupo 1.4 100hp sport, as I lost my job and needed a stop gap car and being young, I didn't fancy paying ££££ on insurance.

Now this week I have had the gearbox replaced with a recon unit and was told the clutch was on it's last legs, so I had that replaced as well. But now, when the car is in gear and no matter if I am changing up or down, the clutch will make a slight grinding noise. This problem cannot be felt through the gearstick or through the clutch. But there is definitely a noise there which wasn't there before. Could anyone hazard a guess at what it could be, before I go back to the garage? My thoughts is on it being the clutch release bearing, but then the clutch won't make the noise if the car is idiling and I lift the clutch up..

Thanks,
Vin

rallycross

13,752 posts

266 months

Sunday 12th June 2011
quotequote all
Did you take the lupo back to the garage you bought it from to try and fix it (yes only retards say brought in place of bought, much like schtrong schweet etc etc)?

If you didn't give them the chance to fix it and you paid someone else to do it you are very unlikely to get anything back. Probably not what you want to hear but that is the way it works.

How do you know the garage you took it to for repairs didn't take advantage of you?

iOversteer

Original Poster:

1,076 posts

210 months

Sunday 12th June 2011
quotequote all
rallycross said:
Did you take the lupo back to the garage you bought it from to try and fix it (yes only retards say brought in place of bought, much like schtrong schweet etc etc)?

If you didn't give them the chance to fix it and you paid someone else to do it you are very unlikely to get anything back. Probably not what you want to hear but that is the way it works.

How do you know the garage you took it to for repairs didn't take advantage of you?
The car went back to the garage I bought the car from, as I have a 3 month warranty. I will be going back on Monday morning to sort this out once and for all, it is just so annoying.


rallycross

13,752 posts

266 months

Sunday 12th June 2011
quotequote all
If it's only a slight bearing noise when the clutch is pushed in I wouldn't worry too much unless it gets worse.

Jasandjules

72,602 posts

258 months

Sunday 12th June 2011
quotequote all
Sounds like the clutch and gearbox might be "bedding in" - as long as there is no grinding/crunching/juddering (Unless I've been lied to by a mechanic......... ). I'd be concerned about only getting a recon unit though by the dealer!


m8rky

2,090 posts

188 months

Sunday 12th June 2011
quotequote all
Jasandjules said:
I'd be concerned about only getting a recon unit though by the dealer!
...its a 10 year old car.It is quite common to replace a major component on a car of this age with a reconditioned unit.A new gearbox would cost more than the value of a 10 yr old Lupo.

redgriff500

28,982 posts

292 months

Sunday 12th June 2011
quotequote all
I have changed many clutches and always used the correct methods - some make a noise - annoyingly mine makes a squeak & has done for years.

Worth checking out but probably nothing to worry about.

steveo3002

11,207 posts

203 months

Sunday 12th June 2011
quotequote all
Jasandjules said:
Sounds like the clutch and gearbox might be "bedding in" - as long as there is no grinding/crunching/juddering (Unless I've been lied to by a mechanic......... ). I'd be concerned about only getting a recon unit though by the dealer!
what part of a gearbox beds in when the clutch is down?

take it back , its not your problem what part is causing , let them sort it

does the box look fresh or is a grubby second hand one

Jasandjules

72,602 posts

258 months

Sunday 12th June 2011
quotequote all
steveo3002 said:
what part of a gearbox beds in when the clutch is down?
I have no idea I was told that a new gearbox might whine/make a few noises a bit when first fitted by a mechanic mate of mine (but he's a tendancy to be economical with the truth so that's why I added the caveat!).