Has this had a front end smash?
Has this had a front end smash?
Author
Discussion

daveknott5

Original Poster:

738 posts

248 months

Friday 24th June 2011
quotequote all
Hi all - just bought a SEAT approved used car from a dealer 240 miles away. It is an EXEO ST and was part of the manufacturer backed approved used scheme.

Have just had a good look under the bonnet and under the car and have noticed some rather unsightly welds and a cracked undertray. Has this been involved in a front end smash do you think guys?








HVAC MATT

1,116 posts

236 months

Friday 24th June 2011
quotequote all
pics dont work

Matt UK

18,084 posts

229 months

Friday 24th June 2011
quotequote all
Pics not working for me confused

Superhoop

4,913 posts

222 months

Friday 24th June 2011
quotequote all
The undertary has probably been snagged up on something, or hit by something on the road

As for poor welds, all I can see is factory seam sealer - Also, if had been welded up that far back in the bay, they wouldn't have repaired it

daveknott5

Original Poster:

738 posts

248 months

Friday 24th June 2011
quotequote all
Matt UK said:
Pics not working for me confused
Strange - the pics are hosted at webshots.com - they seem to work for some people and not others

Risotto

3,933 posts

241 months

Friday 24th June 2011
quotequote all
Can't see the pics but are you confusing seam sealer with welds? If you want to be sure, check shut lines, paint, manufacturing dates on headlights, etc.

daveknott5

Original Poster:

738 posts

248 months

Friday 24th June 2011
quotequote all
here's the pics again - now hosted on photobucket.






Edited by daveknott5 on Friday 24th June 14:31

Crusoe

4,123 posts

260 months

Friday 24th June 2011
quotequote all
All looks fine apart from the undertray that looks damaged though not a big issue if it isn't making any noise or coming off. I would send them a photo and get them to replace the undertray if it was me and I had just bought it. Might claim it wasn't there when they had it up on their ramps though.

anonymous-user

83 months

Friday 24th June 2011
quotequote all
That just looks like factory seam sealer. Tap up the dealer for an undertray though.

ChiChoAndy

73,668 posts

284 months

Friday 24th June 2011
quotequote all
Pictures aren't working because they aren't the direct link, just the link to the photo bucket page with the pic on.

daveknott5

Original Poster:

738 posts

248 months

Friday 24th June 2011
quotequote all
ChiChoAndy said:
Pictures aren't working because they aren't the direct link, just the link to the photo bucket page with the pic on.
Sorry chaps - should be sorted now

Caulkhead

4,938 posts

186 months

Friday 24th June 2011
quotequote all
Looks like someone's been playing dukes of hazzard over speed bumps or humpback bridges. All the welding and sealant looks factory, but I'd insist on a full geometry check as it looks like it's had a fair impact.

otolith

68,836 posts

233 months

Friday 24th June 2011
quotequote all
Looks like there are scuffs on the undertray too. Driven over something too high or too fast, I would say. I once saw a pensioner beach his car on a kerb in a car park, I'd be guessing something like that.

Ecurie Ecosse

4,812 posts

247 months

Friday 24th June 2011
quotequote all
Don't worry about the undertray. On my 147 GTA there were almost a cosnumable, to be replaced at every service smile

Efbe

9,251 posts

195 months

Friday 24th June 2011
quotequote all
looks ok bud

daveknott5

Original Poster:

738 posts

248 months

Friday 24th June 2011
quotequote all
Phew, thanks all. I'll see if I can get a new undertray fitted by the dealer

lost in espace

6,588 posts

236 months

Friday 24th June 2011
quotequote all
daveknott5 said:
Phew, thanks all. I'll see if I can get a new undertray fitted by the dealer
Keep your eye on ebay, I wouldn't bother replacing it if it holds on ok. Just use a few bolts and bits of metal to sort it. Mine on my vw got smashed on a speedbump.

otolith

68,836 posts

233 months

Friday 24th June 2011
quotequote all
lost in espace said:
Keep your eye on ebay, I wouldn't bother replacing it if it holds on ok. Just use a few bolts and bits of metal to sort it. Mine on my vw got smashed on a speedbump.
Bugger that, he's just bought it!

JonnyFive

29,897 posts

218 months

Friday 24th June 2011
quotequote all
I daren't look at my undertray, it'd be a state due to the '5 being too low hehe

Chicane-UK

3,861 posts

214 months

Friday 24th June 2011
quotequote all
Looks like factory welding to me!