TVR wheel caps

[K67 KRB]

So,
I have my new wheels.
Now from what I understand, TVR wheel caps will not fit these wheels, therefore I have to cut the cap bit off, and stick them on with epoxy resin, as per the Bible.

Is this right, has anyone out there managed to get TVR caps, that fit non-standard wheels, if so where can I get these?

Cheers,

martin

[andy43]

Nice wheels on your profile pic! The centre badges on my old 5-spokes were just self-adhesive to stick on top of the plastic centre caps - I think TVR do sell these badges separately. As for the caps, I couldn't get Raceline caps for my wheels (they don't make the wheels anymore), but found that Compomotive MO caps will fit spot on - might be worth a bit of trial and error at your local wheels shop to see if you can find caps that fit your wheels and will also accept the TVR badges.
Edited to add, the centre bore of your wheels should be same as mine to centre on the hubs correctly - 60 or 65mm rings a bell (can't remember which??) - so the MO caps may be suitable? - £15/set of 4 inc.postage from Compomotive

>> Edited by andy43 on Thursday 27th May 18:50

[K67 KRB]

Cheers Andy.

Trial and Error it is then