Brake Caliper Springs
Discussion
Hello all,
I need a set of rear brake caliper springs for the cerbie. It has developed a rattle from the OSR Caliper. I called TMS but they are out of stock and seeing as they are a low-cost item they are not in a hurry to get them in! These springs slide over the pad split pins.
Does anyone have any ideas where i could pick some up? I do not have a clue where to buy springs from!
Nick
I need a set of rear brake caliper springs for the cerbie. It has developed a rattle from the OSR Caliper. I called TMS but they are out of stock and seeing as they are a low-cost item they are not in a hurry to get them in! These springs slide over the pad split pins.
Does anyone have any ideas where i could pick some up? I do not have a clue where to buy springs from!
Nick
New springs won't necessarily stop them rattling, the holes in the pad are slotted and it's the pad rising and falling in the caliper that seems to make the noise, (that's what caused mine to rattle anyway). Take the wheel off and try and move the pad by hand and see if it's vertical rather than horizontal movement that produces the rattle. Bit of copper based grease on the backplate edges should cure it.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


