Best stuff to use to remove glue residue from tinted windows?
Best stuff to use to remove glue residue from tinted windows?
Author
Discussion

Ruskie

Original Poster:

4,509 posts

229 months

Monday 11th July 2011
quotequote all
As title really. Taken tints off and sticky glue residue left won't come off. Any suggestions?

Stu R

21,638 posts

244 months

Monday 11th July 2011
quotequote all
thinners / white spirit / sticky stuff remover (yes it does exist)

Ruskie

Original Poster:

4,509 posts

229 months

Monday 11th July 2011
quotequote all
Tried White spirit. Didn't work.

Lanby

1,106 posts

243 months

Monday 11th July 2011
quotequote all

LuS1fer

43,508 posts

274 months

Monday 11th July 2011
quotequote all
I used a nice sharp Stanley blade to slice under it and roll the main stuff into a ball. I then used methylated spirit I think or maybe alcohol.

turbopug

285 posts

182 months

Monday 11th July 2011
quotequote all
White spirit is crap, the only thing it's good for is drinking when you run out of money for bottles of Tesco vodka.

You need something solvent based. Concept Tar & Glue remover. Comes in 5l tins from decent motor factors and it shifts anything.

Stu R

21,638 posts

244 months

Monday 11th July 2011
quotequote all
turbopug said:
White spirit is crap, the only thing it's good for is drinking when you run out of money for bottles of Tesco vodka.

You need something solvent based. Concept Tar & Glue remover. Comes in 5l tins from decent motor factors and it shifts anything.
White spirit is a solvent. The solvent base of your solvent based recommendation, is white spirit.

tibutron

13 posts

186 months

Monday 11th July 2011
quotequote all
petrol,if on the outside of car. fumes might hang around if used inside but will remove anything sticky!

5LDC

443 posts

208 months

Monday 11th July 2011
quotequote all
Stainless Steel single edge razor blades... i do it A LOT

hexstatic

65 posts

216 months

Monday 11th July 2011
quotequote all
Lighter fluid is a good one. I used it when someone attacked my car at college with masking tape and it got that off piece of cake. Just damp some kitchen roll with it and hold it on the sticky patch for a few seconds and see if it comes off then.

HovisT2

15 posts

182 months

Monday 11th July 2011
quotequote all
The solvent used by double glazing company's is brilliant! Attacks all things sticky!
Get high as a kite though

Deluded

4,968 posts

220 months

Monday 11th July 2011
quotequote all
Autoglym glass polish worked great getting the glue off an old car. tried white spirit too and it was crap

martin mrt

3,883 posts

230 months

Monday 11th July 2011
quotequote all
I used autosmart tardis and a Stanley blade, it worked a treat but it does create an interesting bogey like consistency with the glue

SlipStream77

2,153 posts

220 months

Monday 11th July 2011
quotequote all
I've found that surgical spirit works well.

skinley

1,681 posts

189 months

Monday 11th July 2011
quotequote all
WD40

Jack Dupp

135 posts

196 months

Monday 11th July 2011
quotequote all
Just removed tints from a car the other day.

Stanley knife blade and fairy liquid or any washing up liquid in a spray bottle.

soak the window using the soapy spray then just use the blade on its edge and keep scraping until its all off, then give the window a good clean using decent glass cleaner.


Riley Blue

23,205 posts

255 months

Tuesday 12th July 2011
quotequote all
Methylated spirit is the cheapest solution.

Ruskie

Original Poster:

4,509 posts

229 months

Tuesday 12th July 2011
quotequote all
Cheers for the advice. Will give the stanley knife a go first before going shopping for a remover.

CoolC

4,500 posts

243 months

Tuesday 12th July 2011
quotequote all
Single edge blade with soapy water to remove the majority, then acetone (nail polish remover) to finish off.

LuS1fer

43,508 posts

274 months

Tuesday 12th July 2011
quotequote all
CoolC said:
Single edge blade with soapy water to remove the majority, then acetone (nail polish remover) to finish off.
At the huge risk of dripping the acetone and taking big chunks out of your vinyl.