Powder coating alloy wheels
Powder coating alloy wheels
Author
Discussion

e11

Original Poster:

32 posts

234 months

Tuesday 19th July 2011
quotequote all
Hi guys,

Picked up my Orange Gallardo Spyder last week and fancy changing the alloys to shiny black.

I can find plenty of companies that offer this service, but always prefer to go by recommendation where possible. So can anyone recommend a company in the Essex area to do this?

Thanks in advance!

UH-Matt

2,173 posts

271 months

Tuesday 19th July 2011
quotequote all
My F430 wheels are being done gloss black right now.

I am using Prestine in Milton Keynes (http://www.pristinealloywheels.co.uk/) quite expensive but just about the best.

Lepsons are also good.

Both aren't a million miles away from you, and Prestine also collect I believe.

e11

Original Poster:

32 posts

234 months

Tuesday 19th July 2011
quotequote all
Thanks Matt, will check them both out. How long do they need your car for?

UH-Matt

2,173 posts

271 months

Tuesday 19th July 2011
quotequote all
Prestine took 2 or 3 days (they had the wheels from friday, and its ready now, collecting tomorrow). They (unlike a lot of places) do a proper chemical strip, followed by a blast followed by proper layers and baking. Will post up pictures when I get it back tomorrow.

If the car needs any work then you can take it to Backdraft Motorsport in MK and the wheels can go to Prestine while the car is taken care of and kept at Backdraft, mine is in for a full Geo setup (something you may well want to consider). BDM know how to take care of Lambo's and while you there you can perve over their two GT3 Gallardo Britcars smile

e11

Original Poster:

32 posts

234 months

Tuesday 19th July 2011
quotequote all
UH-Matt said:
Prestine took 2 or 3 days (they had the wheels from friday, and its ready now, collecting tomorrow). They (unlike a lot of places) do a proper chemical strip, followed by a blast followed by proper layers and baking. Will post up pictures when I get it back tomorrow.

If the car needs any work then you can take it to Backdraft Motorsport in MK and the wheels can go to Prestine while the car is taken care of and kept at Backdraft, mine is in for a full Geo setup (something you may well want to consider). BDM know how to take care of Lambo's and while you there you can perve over their two GT3 Gallardo Britcars smile
Thanks for the info Matt, much appreciated. Two birds, one stone sounds appealing. Pictures of your alloys when finished would be great too - black wheels definitely suit your colour 430 so no doubt you'll be very pleased.

WIJ933

759 posts

238 months

Tuesday 19th July 2011
quotequote all
Not meaning to put the cat amongst the pigeons but.......

Ferrari's and Lambo's don't always have alloy (Aluminum) wheels. The wheels are made of magnesium and normal refurbishers cannot do them - the wheel just melts in their chemical vat!

Just a word of warning.......


andysv

1,363 posts

258 months

Tuesday 19th July 2011
quotequote all
these guys have done all of my wheels, highly recommended.

http://www.wheelrefurbishing.com/OLDSITE/contact.h...

UH-Matt

2,173 posts

271 months

Tuesday 19th July 2011
quotequote all
WIJ933 said:
Not meaning to put the cat amongst the pigeons but.......

Ferrari's and Lambo's don't always have alloy (Aluminum) wheels. The wheels are made of magnesium and normal refurbishers cannot do them - the wheel just melts in their chemical vat!

Just a word of warning.......
Not true for Callistos (which are on OP's Gallardo) or F430/Challenge wheels which are what I have.


UH-Matt

2,173 posts

271 months

Wednesday 20th July 2011
quotequote all
Just got mine back. Car had a full geo setup slight adjustment to drop the suspension a little (always looked too high) and the wheels done at Prestine in Milton Keynes while the car was with BDM for the geo - great job all around and I am very pleased with the result -


Beaver

1,055 posts

315 months

Wednesday 20th July 2011
quotequote all
Looks great - maybe wrap the wing mirrors in black, or carbon?

UH-Matt

2,173 posts

271 months

Wednesday 20th July 2011
quotequote all
Yea I am also considering a black 16M stripe, but don't want to go too far!

V10 BAT

1,718 posts

265 months

Wednesday 20th July 2011
quotequote all
Love black wheels, Matt,that looks excellent .
Have heard those guys do a great job.