Main dash removal-mounting points
Discussion
I'm about to take the main dash out on my car,probably over the weekend,in order to fit a big portion of the a/c system.I seem to recall in the past that i have seen a diagram of where all of the mounting nuts/bolds are that hold it all in place? Is anyone out there familiar with how many and where they are? Any help/pics much appreciated as i dont really fancy having to find them all from scratch!
Hi,
I wrote an article about it for 'The Resource' a while ago.
http://www.rv8r.co.uk/griffdash.html
HTH
Any queries just shout.
Cheers
Marty
I wrote an article about it for 'The Resource' a while ago.
http://www.rv8r.co.uk/griffdash.html
HTH
Any queries just shout.
Cheers
Marty
Sorry dont have any pictures but they IIRC about 5 or 6 all located inside the dash at the top, you need to remove the clocks and glove box. All the centre bolts are captive but the two outer bolts have nuts behind which are a little tricky to get to. Once the clocks and vents are out its litterally a 10 minute job removing the rest.
Chris
edit to say
Marty V8 beat me to it with a much better details
Chris
edit to say
Marty V8 beat me to it with a much better details
Edited by chris52 on Tuesday 19th July 20:38
I guess i'm looking forward to it as it's a big step forward for me(probably the biggest hurdle left) towards finally getting the car finished after all the crap thats happened.It makes it much easier and less daunting when you know your going to have a full re-trim after its done,so damaging anything doesnt really come ino it.
Gassing Station | Griffith | Top of Page | What's New | My Stuff






