headlamps on tasmin
headlamps on tasmin
Author
Discussion

cerberatony

Original Poster:

417 posts

214 months

Monday 1st August 2011
quotequote all
i have a tasmin and when i turn off headlamps they close very quickly and bang down quite hard is this a tasmin trate or is there some sort of cushioning missing

pk500

1,975 posts

242 months

Monday 1st August 2011
quotequote all
mine shoot down alot quicker than they pop up, are you going to helmingham hall sunday!

wedgeinald

1,314 posts

220 months

Monday 1st August 2011
quotequote all
Mine seem to clunk as they drop too.

I believe you can adjust the position they drop to (so they are flush with the bonnet) but not sure if you can adjust the rate, not sure if there is much you can do padding wise to lessen the effect.

The motors on the headlamps are basically a windcreen wiper motor with 2 "park" positions (one for up and one for down) and the motor runs in the same direction for both raising and lowering.

If you do find out something I don't know please let me know.

Mr Tank

5,799 posts

305 months

Monday 1st August 2011
quotequote all
Hi

The headlight stop is a piece of rubber hose which is adjustable. If it's worn out it will not stop the headlights well. So just replace it with a new soft piece of hose!

Andy

Edited by Mr Tank on Monday 1st August 22:33

cerberatony

Original Poster:

417 posts

214 months

Monday 1st August 2011
quotequote all
cheers for that. mine is in for its first mot in 15 years as thats how long its been sat in a garage. fingers crossed