Discussion
Was wondering if anyone could help here? Earlier i was driving when the speedo started whipping up and down to around 50mph when driving, any clue, could it be the cable? One thing i clipped a big horse s
t not long before, could this of got stuck on a sensor? Have no idea, help would be much appreciated, cheers.
t not long before, could this of got stuck on a sensor? Have no idea, help would be much appreciated, cheers.Jcerb said:
Cheers guys firstly. All electrics seem fine everything working fine, just the speedo. So this sensor is it easy to get to? I have no access to a pit at the moment. Is it visible easily?
I've replaced mine using jack/stands, it's quite easy to spot once you crawl under the back. The margin for them working or not working is quite narrow I found - a couple of turns too far away from the sprocket and it doesn't work, so I'd imagine if it's got horse s
t in it that could be the problem! Can't remember the exact gap it's meant to have but I'm sure someone will be along to fill that in for you! I'd clean/regap and see if that sorts it.Dom
ETA: http://www.varleyhyd.com/FJ062.asp#SpeedoSensor
Mine went intermitant. Took it off and cleaned it, re-gapped it and much fiddling around to save the cost of the replacement part, but got nothing! Put a new one on and took 3 attempts to get it's gap set right (de-creasing each time). The gap is minimal, but once set I found the reading to be very accurate (I caliberated it against a GPS readout at various speeds on the motorway).
Gassing Station | Cerbera | Top of Page | What's New | My Stuff





