Go Pro Hero
Author
Discussion

Rhodie

Original Poster:

112 posts

283 months

Thursday 18th August 2011
quotequote all
GT3 roll bar mounts, I have the clamps but the rear view mirror provides a great video of itself!

I think a screw welded in the middle of the cross bar would work. A ball socket would then give the adjustment needed.

Any natty ideas out there?


6C4GTS

5,186 posts

209 months

Thursday 18th August 2011
quotequote all
Did you not get the suction cup and 3 way adjustable arm?
Stuck to rear or side window gives all the adjustment you could wish for.

puntograle

2,667 posts

239 months

Thursday 18th August 2011
quotequote all
How about hanging the Go Pro unit upside down from the top cross member nearer the roof. It might hang lower than the rear view mirror (not sure if there is sufficient clearance at the top to allow the clamp to by fitted here).

If it clears the rear view mirror, then you can set the Go Pro settings to flip the recording upside down so that it records the 'right way up' if that makes sense.

Al W

591 posts

258 months

Thursday 18th August 2011
quotequote all
6C4GTS said:
Did you not get the suction cup and 3 way adjustable arm?
Stuck to rear or side window gives all the adjustment you could wish for.
Apparently a lot of circuits won't allow suction mounts. I've been allowed out on track with mine, but the marshal knew what it was and checked it was secure, plus I'd added a rope lanyard to prevent it moving far if it did come loose

mrmr96

13,736 posts

235 months

Thursday 18th August 2011
quotequote all
Al W said:
6C4GTS said:
Did you not get the suction cup and 3 way adjustable arm?
Stuck to rear or side window gives all the adjustment you could wish for.
Apparently a lot of circuits won't allow suction mounts. I've been allowed out on track with mine, but the marshal knew what it was and checked it was secure, plus I'd added a rope lanyard to prevent it moving far if it did come loose
^ This, though I'd suggest you're lucky the marshall allowed it: most give a flat 'no'.

Since you have a cage the best option is to use a clamp mount. As the other poster pointed out the Go Pro has as an 'inverted' setting which allows you to place it upside down, but it records so that the playback is right side up (so no need to flip it in post processing).

If you can't get the Go Pro cage mount to work, then you can get an adapter which allows the Go Pro case to work with any threaded mount you can buy, of which there are lots of options.

This opens up the world of mounts:

puntograle

2,667 posts

239 months

Thursday 18th August 2011
quotequote all
^^ Agreed.

I had assumed the OP was using the standard widget. However, yes OP could also get other clamps with different clearing.

Magic919

14,596 posts

232 months

Thursday 18th August 2011
quotequote all
I use a Manfrotto Super Clamp.

Rhodie

Original Poster:

112 posts

283 months

Thursday 18th August 2011
quotequote all
OK sorted thank you very much.

As suggested, hung the super clamp upside down, threaded mount and inverted the recording.

The top bar provides many angles. New to the Go Pro.

Brilliant kit.

Thanks