Mag wheels
Author
Discussion

ruane

Original Poster:

198 posts

229 months

Saturday 20th August 2011
quotequote all
I have had Mag wheels finished in black and was advised not to powder coat them, however they blistered don't won't to make the same mistake again please advise, thanks in advance

DAB964RS

214 posts

198 months

Saturday 20th August 2011
quotequote all
The most important aspect of refurbing Mag wheels is o ensure they are di-chromated prior to preparing for paint. If you don't do this, they will blister. Unfortunately most wheel refurbishers don't offer a di-chromate service.

ChrisW.

8,166 posts

286 months

Saturday 20th August 2011
quotequote all
Thanks David, I believe you are correct, even oven drying over a long time is not the solution ?

Where would you get this done ? smile

Tnx, Chris

DAB964RS

214 posts

198 months

Sunday 21st August 2011
quotequote all
Hi Chris

I'm not aware of a one-stop shop who will undertake all the necessary steps to get Mags restored to OEM finish and stay that way!

Based on my experience you will need to use 2 suppliers, the first to strip, crack test, di-chromate and add an etch prior to paint, and the second to paint and lacquer.

I've used Reality Motor works in Bristol to do the first stage - they are essentially a motorcycle refurbishment outfit, but they have lots of experience in working with magnesium, as many race bikes also have magnesium wheels. Their link is below, a guy called Griff is the owner, he's very knowledgeable and ethusiastic - a pleasure to deal with!

http://www.realitymotorworks.com/

Regarding painting - assuming you go for a wet paint finish rather than powder coat, I would suggest that most GOOD bodyshops will be able to paint them to the required standard. One word of caution though - make sure that the bodyshop don't over do the wet n' dry prepping in an attempt to smooth out any imperfections in the magnesium casting. If they do this, the di-chromate will be removed and you will be back to square one.

PM me if you want more info....



khushy

3,984 posts

250 months

Sunday 21st August 2011
quotequote all
Marvic in the UK do motorcycle mag wheels new and they also refurbish them incl the chromate.

I would try them.

MarkKo

170 posts

228 months

Tuesday 30th August 2011
quotequote all
I got a set of Dymags included in a race car,my comment would be before a magnesium wheel refurb get them crack tested they can look fine and still have invisible fractures that you can't see with the naked eye.
Most of mine ended up in a skip. :-(