MC1 cam questions.....

[V8FROG]

hi i am about to order a new cam for my orange lady...people told me the MC1 was what i should use.ROB and RAY told me i wont need a re tune or re map so i guess i ll get that one.DAZ u told me ur car was different with this cam...how was it???i am getting the complete kit.what else should i change at the same time????and how to run the cam....do u have to drive the car slowly for a period of time.or u can go nuts on the loud pedal???tks for ur comments guys....my clutch just arrived this morning (tks to the malaysian customs i paid an extra 250 pounds.!@#$%^&*(()

[SILICONEKID340HP]

I don`t know how to run it in you need to ask the experts , its difficult to say how good the cam is next to the standard factory fitted one because mine was worn out..All i can say is it went like a rocket ,very smooth good for low speed cruising when your posing around town..I think your going to be very happy with it ..problem is you live the other side of the world ,if you could take it to V8D they could check if the Stealth would fit without problems..Your not on your own with the customs there going to hammer me with stealth Tax for the injectors from the US..

You wanted a Stealth cam but only got Stealth tax

Edited by SILICONEKID340HP on Monday 22 August 18:43

[V8FROG]

SILICONEKID340HP said:

I don`t know how to run it in you need to ask the experts , its difficult to say how good the cam is next to the standard factory fitted one because mine was worn out..All i can say is it went like a rocket ,very smooth good for low speed cruising when your posing around town..I think your going to be very happy with it ..problem is you live the other side of the world ,if you could take it to V8D they could check if the Stealth would fit without problems..Your not on your own with the customs there going to hammer me with stealth Tax for the injectors from the US..

You wanted a Stealth cam but only got Stealth tax

Edited by SILICONEKID340HP on Monday 22 August 18:43

ahaha yes i was pretty happy when Fedex called me but when the lady's voice said ,oh u have to pay 1070ringgit(nearly 300pounds)i passed out ahahah.and i am about to order my new cam,,,damn it!!i ll ask V8D to write down used parts on the boxe ahahah.why i cant fit the Stealth cam???is it cause of my pistons????

[SILICONEKID340HP]

Ask V8D ive been told some times you can get away with it, I don`t even think you need the verneer timming set with the MC1..

[clive f]

to run in a cam you just start the engine and hold at around 2000rpm for about 15 to 20 minutes, that way its not working hard and gets plenty of oil around the bearings, you should receive instructions about doing this with your new cam, rob, V8racing is the man to ask if in doubt.

[pjac67]

I'm running a MC1 cam that Rob did 12m ago. I can't give any pre or post comment I bought the car this year but it is the smoothest engine with consistent power through the rev range with NO problems idling or at low speed so a big from me.