Bearings for input shaft to diff on RT/10

[ViperPict]

Can anyone advise as to what bearings (left and right) I need to order for the the diff input shaft on my 1996 RT/10? I'm getting an OS Giken LSD fitted and the existing bearing won't be able to be rescued. Thanks in advance!

[MADMAX-UK]

ViperPict said:

Can anyone advise as to what bearings (left and right) I need to order for the the diff input shaft on my 1996 RT/10? I'm getting an OS Giken LSD fitted and the existing bearing won't be able to be rescued. Thanks in advance!

There's machining required for this job - I believe OSG provide instructions with the diff.
I don't know enough to give you any guidance on bearings but I do know the 1/2 shafts are secured in a different way.
Drop me a PM if you're still unclear.
Ade

[Dr-Bob]

Speak to Geoff Hauser at Hauser racing ... Great guy and he has done 5 plus diffs for me now all great,and don't forget to have a drain plug tapped in .
Baz

[ViperPict]

Hauser Racing to the rescue with new bearing set!

[Dr-Bob]

good job........

[Leatherman]

Dr-Bob said:

Speak to Geoff Hauser at Hauser racing ... Great guy and he has done 5 plus diffs for me now all great,and don't forget to have a drain plug tapped in .
Baz

Yes I agree as I went there last year on the Doc's recommendation to have the diff seal changed and a few more jobs whilst it was there. Best not ask him to change the spark plug leads though as he is probably still swearing about mine

[ViperPict]

Yeah, on Nad's advice I went to Hauser Racing and everything sorted and fitted now. Just need to 'bed in' the diff now!

[Dr-Bob]

Known Geoff for years great Guy.... Recomended him to a few people now.....