996 GT3 Gearbox update
996 GT3 Gearbox update
Author
Discussion

sportsandclassic

Original Poster:

3,774 posts

249 months

Wednesday 31st August 2011
quotequote all
Hi,

Just a quick update for all those interested:



Removed from car and ready for strip.



Gear set.



Top cover removed and diff out.



Gear stack removed for stripping.



Stripped down.



Inside diff housing.



Mainshaft stripped down.



One of the main bearings, this is very small for its loading and does wear out quickly.



New 3rd/4th gear motorsport metal synchro rings.



Setting tooling up for measurment.



Taking a pinion shaft height measurment.



Old plates removed and new motorsport pack ready for installation.





Warming crownwheel to refit on diff carrier.



Almost finished with it !

Mike




Edited by sportsandclassic on Wednesday 31st August 18:10

keep it lit

3,388 posts

198 months

Wednesday 31st August 2011
quotequote all
Hi Mike,

Looks like familiar work mate...

What condition is your box in compared to mine you recon'd a few months back then mate...?

Ade

sportsandclassic

Original Poster:

3,774 posts

249 months

Wednesday 31st August 2011
quotequote all
keep it lit said:
Hi Mike,

Looks like familiar work mate...

What condition is your box in compared to mine you recon'd a few months back then mate...?

Ade
Far better !

Although I was told when I bought mine it had a motorsport diff pack fitted, Well it did not and it was built incorrectly to start with..

Mike

David Hype

2,296 posts

283 months

Wednesday 31st August 2011
quotequote all
Hi Mike

Very interesting, please keep the pictures coming... Also, the occasional information about numbers of hours incurred during this rebuild and the cost (cough) of upgraded parts would be great!

thumbup


sportsandclassic

Original Poster:

3,774 posts

249 months

Wednesday 31st August 2011
quotequote all
Hi,

Lost all track of cost... The words cost and gt3 don't go together very well!

I have got gt3 cup gear cables and 2010gt3 rs shifter to install along with 964rs single mass flywheel and light weight front pulley.

Along with all my suspension mods it will be a while before she rides again... frown

Mike

fioran0

2,410 posts

203 months

Friday 2nd September 2011
quotequote all
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.

Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.




sportsandclassic

Original Poster:

3,774 posts

249 months

Friday 2nd September 2011
quotequote all
fioran0 said:
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.

Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.


Hi, Fun... maybe not! We have fitted dozens of those diff plates and they are amazing in the GT cars. I was under the impression mine had one already fitted, but it did not. Diff was working when I bought the car and it had good break off torque. As for the oil was going to use Mobil 1 75/90 PTX.

Mike

996TT_STEVO

4,078 posts

259 months

Friday 2nd September 2011
quotequote all
Motorsport plates way to go thumbup

cragswinter

21,429 posts

227 months

Friday 2nd September 2011
quotequote all
Would be god to have a basic cost of the job though mike-even if it was based on ades job.

A lot of these cars have had some serious track use & it would be great for owners to have an idea of what things may cost if they need to go down the rebuild route.

Slippydiff

16,503 posts

254 months

Friday 2nd September 2011
quotequote all
fioran0 said:
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.

Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
But for a road going car with otherwise perfect chassis and geo settings how will the lack of preload in the diff manifest itself on the road ? I ask as any 911 will have inherently good traction, I suspect a large amount of the diffs work in these cars actually occurs under throttle off, braking conditions whereby the preload makes the car more stable ?

sportsandclassic

Original Poster:

3,774 posts

249 months

Friday 2nd September 2011
quotequote all
Slippydiff said:
But for a road going car with otherwise perfect chassis and geo settings how will the lack of preload in the diff manifest itself on the road ? I ask as any 911 will have inherently good traction, I suspect a large amount of the diffs work in these cars actually occurs under throttle off, braking conditions whereby the preload makes the car more stable ?
Hi,

As you say regarding road cars and diff operation, you can notice a slight difference in the way the car puts the power down also you can suffer uneven tyre wear, main advantage as you state does come from braking it keeps the back end pinned down rather than squirming around which mine started to do on the road.

From my limited experience with gearboxes, I would say that a road car driven propely a standard diff pack would last you around 15000 miles and it would need adjustment. 2 track days if lucky would see it off as it works a lot harder. Mine was set at 55NM preloading when I got my car, it had less than 15NM when I stripped it.... 3500 road miles and 400 +/- track miles. I thought it strange as I thought it was upgraded (so did previous owner) and examined the diff plates....well suprise it was on standard plates. So in went new motor sport diff pack.

As for cost's involved it really does depend on whats wrong...if that main beairng collapses which they all will do, you need a new beairng carrier and it costs £200.00 for the carrier throw in £1400 more beairngs and £1200 worth of synchro rings plus £900 labour to do the rebuild it soon adds up.

On average they can cost £1500 to £X

Mike

fioran0

2,410 posts

203 months

Friday 2nd September 2011
quotequote all
slippy,
i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.

for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.

avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway smile

the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.

Slippydiff

16,503 posts

254 months

Friday 2nd September 2011
quotequote all
fioran0 said:
slippy,
i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.

for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.

avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway smile

the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.
I agree wholeheartedly with your comments F. I guess what I'm asking is how one would know the diff isn't functioning as it was intended ? Does the car become noticeably more unstable under braking ? and for example is traction when pulling out of side road in the wet noticeably compromised ?

keep it lit

3,388 posts

198 months

Friday 2nd September 2011
quotequote all
cragswinter said:
Would be god to have a basic cost of the job though mike-even if it was based on ades job.

A lot of these cars have had some serious track use & it would be great for owners to have an idea of what things may cost if they need to go down the rebuild route.
I went for the lot;
Cup crownwheel & pinion 8:32 kit
Cup cables
Cup steel syncros 2/3/4th gears
Cup diff pack
997.2 steel mech shifter
All new bearings where needed
Replacement 1st gear
Millers fully synthetic race 75-90 gear oil

Cost £4-5k.. inc full stripdown inspection report & rebuild labour with Mike at S&C.

Credit to Mike as the box has transformed the car on track. Traction from the diff is incredible, both braking into and exiting corners at speed is fantastic. The lower final drive also brings fifth gear into use for example at Donington & Oulton which makes things exciting! Using the latest generation shifter combined with the solid cup cables & steel synchros, makes the gearshift ultra fast & precise..

Next..extra power.

Ade




agtlaw

7,441 posts

237 months

Friday 2nd September 2011
quotequote all
sportsandclassic said:
I thought it strange as I thought it was upgraded (so did previous owner) and examined the diff plates....well suprise it was on standard plates. So in went new motor sport diff pack.
the previous owner didn't advertise the car as having a motorsport diff or cup plates but he had the diff refurbished by fearnsport at a cost of around £600 just a few months before selling the car.

how worn were the original diff plates?

fearnsport say that the original shims don't usually provide enough friction between the plates and they don't wear. fearnsport's solution is to fit larger shims.

NIgt3

627 posts

205 months

Friday 2nd September 2011
quotequote all
Where's the best place to buy Motorsport plates for the diff??

sportsandclassic

Original Poster:

3,774 posts

249 months

Friday 2nd September 2011
quotequote all
agtlaw said:
the previous owner didn't advertise the car as having a motorsport diff or cup plates but he had the diff refurbished by fearnsport at a cost of around £600 just a few months before selling the car.

how worn were the original diff plates?

fearnsport say that the original shims don't usually provide enough friction between the plates and they don't wear. fearnsport's solution is to fit larger shims.
The car WAS advertised with a rebuilt diff containing cup plates.... just checked the advert. Not that I am looking for anything from previous owner.

Original plates were worn a fair amount and they quickly diminshed over a few track days and road miles.

Only way forward is Cup plates.

Mike

Dave 321

558 posts

271 months

Friday 2nd September 2011
quotequote all
looks good Mike,

i fitted cup pack to mine last year, makes the car much more controllable in the wet. Drift machinesmile

understeers a bit more when tyres are cold on roundabouts etc, once heated up they are fine.

You would be doing well to wear the cup plate back to the OE plate torque too!

sportsandclassic

Original Poster:

3,774 posts

249 months

Friday 2nd September 2011
quotequote all
NIgt3 said:
Where's the best place to buy Motorsport plates for the diff??
ME ! or a dealer smile

Cost £668.68 plus vat. I can get you a set less a small amount of discount.

Mike

Dan7357

2,648 posts

239 months

Friday 2nd September 2011
quotequote all
sportsandclassic said:
ME ! or a dealer smile

Cost £668.68 plus vat. I can get you a set less a small amount of discount.

Mike
Labour costs?

Maybe a group buy/fitting??