Exhaust question!

[sc00by57]

opened the garage last nite for the first time since sat and noticed drivers side exhaust wasnt sitting right, further investigation and the box has cracked!
wot are my options?
1) just replace like for like?

2)aftermarket system?

wotever choice any ideas where from?

steve

[Podie]

Check out the Carbon Can Company ones... look but sound

[darty]

The exact same thing has happened to me on my current car and my previous Tuscan. I have taken them both to Racing Green to be welded. I think to weld stainless steel you need MIG/TIG(?) welding equipment. Both of the exhausts had to be removed from the car (I think the passenger side is above the drivers side exhaust as it runs down the centre of the car) before they it could be welded. Something about sparks under the fuel tank I think... Anyway, I think it cost me half an hours labour plus vat.

Hope this helps
Darty

[sc00by57]

being a welder(used to be)i could weld them myself but thought maybe full de-cat!
any contacts for ccc

[EddyB]

sc00by57 said:

being a welder(used to be)i could weld them myself but thought maybe full de-cat! any contacts for ccc

Eek full de-cat eats the petrol

www.carboncan.co.uk/ - that should get you contact/address etc

>> Edited by EddyB on Wednesday 9th June 16:57

[sc00by57]

looking at the ccc site do they only do end cans????? not what i need its the box that the can clamps too! would ask synergy but couldn't have happened at a worse time!

[whitey]

get it welded.

[sc00by57]

ok so i'll just take the exhaust off 2moro nite and weld it up sat!