Discussion
Well its on at last,new back boxes from dulfords and may i say it sounds really really nice.Bit of a pig to line up etc,but took my time and got there in the end.Managed to buy some ramps today that the cerb will go up
for 35 sqiud.Got em from a place called trago mills,shame i found em after the event but thats life.Will take her out for a blast tonight and will report back on cabin noise
.Oh just a side note the rear rubbers were ok but for added strengh i put a nice wide cable tie around the rubber to give it more support,and it worked a treat
for 35 sqiud.Got em from a place called trago mills,shame i found em after the event but thats life.Will take her out for a blast tonight and will report back on cabin noise
.Oh just a side note the rear rubbers were ok but for added strengh i put a nice wide cable tie around the rubber to give it more support,and it worked a treatGray_101 said:
Raceproved supplied me with polybush exhaust hangers, they are much stronger than the rubber ones, no cable ties or bits of wire required, my exhausts hang perfect
yeah had em on the scooby will do em when i attack under the car later this year.On a seperate note why do these systems make a power loss?back pressure?
spongy said:
Gray_101 said:
Raceproved supplied me with polybush exhaust hangers, they are much stronger than the rubber ones, no cable ties or bits of wire required, my exhausts hang perfect
yeah had em on the scooby will do em when i attack under the car later this year.On a seperate note why do these systems make a power loss?back pressure?
the differance between my old cheap sports system and the RP big bore power sports system was 27 BHP
This is the RP big boar system currantly fitted to mine
Edited by Gray_101 on Saturday 3rd September 18:52
i also changed mine to poly ones, powerflex do some universal ones that are a good match to the originals, got mine from ebay. i also changed the hangers to bolts
http://s100.photobucket.com/albums/m26/pmessling/?...

http://s100.photobucket.com/albums/m26/pmessling/?...

pmessling said:
i also changed mine to poly ones, powerflex do some universal ones that are a good match to the originals, got mine from ebay. i also changed the hangers to bolts
http://s100.photobucket.com/albums/m26/pmessling/?...

Yeah i looked at the hangers.Did take em out thinking you could wind em out and they did'nt go back on so well,so i had to put a bolt in behind,now i have some adjustment;)http://s100.photobucket.com/albums/m26/pmessling/?...

spongy said:
AWWWW Nice,wish i had looked into this a bit more.will run this system for a few years then do the whole thing with the best system i can afford.Spent 1700 squid on scooby system,and hated the sound on it when it aged
How much??? Please tell me that included manifolds? Maybe even a turbo? lolPursyluv said:
Spongy - Trago Mills is that the place owned by that anti-European lunatic, err i mean gentleman.
LOL yeah thats the place,am looking into those restoration ramps for the long term jobs,cant decide whether to go the whole hog and spend about a grand on a set or spend 300 squid and make do.ohhhhh its tough at the top;)spongy said:
Pursyluv said:
Spongy - Trago Mills is that the place owned by that anti-European lunatic, err i mean gentleman.
LOL yeah thats the place,am looking into those restoration ramps for the long term jobs,cant decide whether to go the whole hog and spend about a grand on a set or spend 300 squid and make do.ohhhhh its tough at the top;)
tsGassing Station | Cerbera | Top of Page | What's New | My Stuff




The man is outspoken some may say,but very rich.