Micro Dynamics EMS5

[taz turbo]

A long shot, but would anyone have a Micro Dynamics EMS5 that they no longer use and would be willing to part with.

Before the replies come in to dump it and fit a fully mapped ECU, I don't want one and want to retain the cars originality.

Regards,

Chris.

[stevieturbo]

There's one for sale on ebay.


Although fitting a mapped alternative would of course be much better. Even megajolt or something.
If you wanted to retain the original look....leave the crude EMS5 in place lol

[Steve_D]

stevieturbo said:

...If you wanted to retain the original look....leave the crude EMS5 in place lol

Or gut the EMS5 case and build Megajolt into it.

Steve

[taz turbo]

Stevie,

Thanks for the heads up on the one for sale. I really want to retain the originality so anything other than the EMS is out of the equation, I understand the EMS are a compromise, but interestingly last time it was on the rollers I requested a dizzy swing, three degrees advanced then three degrees retarded, both WOT outputs were down throughout, so rough as the EMS are its works well (in my instance). However I do understand all this is at WOT, but the car still goes well for a 2.8 cologne.





And I'm still running the OE Bosch K Jetronic!

Chris.