997.1 GT3 RS factory fire extinguisher mounts
997.1 GT3 RS factory fire extinguisher mounts
Author
Discussion

Candellara

Original Poster:

1,890 posts

213 months

Wednesday 7th September 2011
quotequote all
Have the factory issue fire extinguisher (not fitted)but supplied with the car.

If i remove the cylindrical carpet cut outs, there are no pre-drilled holes in the floorpan of the N/S passenger footwell.

I have the bolts and the spacers for mounting (again supplied with car) but no pre-drilled holes?

Any ideas chaps? Is this normal? Car is 57 plate BTW

PJI

308 posts

237 months

Wednesday 7th September 2011
quotequote all
Hi, they should be there! If you remove the plastic plugs and the foam filling you should see the hole for the bolt!

Candellara

Original Poster:

1,890 posts

213 months

Thursday 8th September 2011
quotequote all
PJI said:
Hi, they should be there! If you remove the plastic plugs and the foam filling you should see the hole for the bolt!
Yep, removed the carpet cut outs and the foam "tubes" but underneath all this, it's just plastic?

Are you saying that, what looks like just plastic under the carpe and foam should be some plugs that are removed exposing the bolt holes?


PJI

308 posts

237 months

Thursday 8th September 2011
quotequote all
Yes this was the case on my 996 however I must admit that I have never looked at in on my 997.

If nobody else posts a reply I will have a look at mine over the weekend.

duckspeed8

314 posts

228 months

Thursday 8th September 2011
quotequote all
Should be a couple of threaded inserts in the floorpan. Should look like this , sorry for poor pic.

Candellara

Original Poster:

1,890 posts

213 months

Thursday 8th September 2011
quotequote all
If i remove the carpet cut-outs, there doesn't appear to be any bolt holes.

Phoned Porsche and they've looked my car's spec up and confirmed that the car had optioned "003" race equipment installed so they should be there.

The only thing i can think is that the threads are covered with a plastic plug that needs removing?

Candellara

Original Poster:

1,890 posts

213 months

Thursday 8th September 2011
quotequote all
Well, i'm lost on this. Pics attached. Are the bolt holes filled at the factory and over-painted or have Porsche omitted to fit them as part of the 003 option?

Any thoughts chaps?


Candellara

Original Poster:

1,890 posts

213 months

Thursday 8th September 2011
quotequote all
Sorry about poor quality of pics