Drilling holes in 996 turbo exhaust ?
Drilling holes in 996 turbo exhaust ?
Author
Discussion

Captain Barnacle

Original Poster:

20 posts

182 months

Tuesday 13th September 2011
quotequote all

AndrewMontgomery

502 posts

226 months

Tuesday 13th September 2011
quotequote all
I would put my hard hat on if I were you. Im not thinking this is something this forum will approve of smile

Captain Barnacle

Original Poster:

20 posts

182 months

Tuesday 13th September 2011
quotequote all

Captain Barnacle

Original Poster:

20 posts

182 months

Tuesday 13th September 2011
quotequote all
Ha ha! Im thick skinned, not really thinking of doing it personally, just curious.

khushy

3,984 posts

250 months

Tuesday 13th September 2011
quotequote all
why not just wait until the day after your warranty runs out - then a rusty 1" hole will magically appear anyway!

(even though its not exactly covered under OPCW anyway)

khushy

RDM

1,860 posts

238 months

Tuesday 13th September 2011
quotequote all
Sunnyside on that thread is on here as SunnysideBB I think, try asking in the
Scotland section.

6C4GTS

5,186 posts

209 months

Tuesday 13th September 2011
quotequote all
RDM said:
Sunnyside on that thread is on here as SunnysideBB I think, try asking in the
Scotland section.
Frank is in here more than the Regional section.

Captain Barnacle

Original Poster:

20 posts

182 months

Tuesday 13th September 2011
quotequote all
Sunnyside on that thread is on here as SunnysideBB I think, try asking in the
Scotland section.

Are you implying that this is a cheap skate mod? due to the fact that everyone in Scotland are tight wads?

Ps iPhone won't let me put a smily face on, before anyone thinks I am being serious

996ttalot

1,931 posts

206 months

Tuesday 13th September 2011
quotequote all
Captain Barnacle said:
Sunnyside on that thread is on here as SunnysideBB I think, try asking in the
Scotland section.

Are you implying that this is a cheap skate mod? due to the fact that everyone in Scotland are tight wads?

Ps iPhone won't let me put a smily face on, before anyone thinks I am being serious
Frank has not done this - he has a Milltek on his car as it is in our shop.

6C4GTS

5,186 posts

209 months

Tuesday 13th September 2011
quotequote all
Captain Barnacle said:
due to the fact that everyone in Scotland are tight wads?
Fighting talk?? biggrin

JW911

936 posts

226 months

Wednesday 14th September 2011
quotequote all
Done it.

Works fine with a one inch hole. Tiny bit of drone around 2000rpm under load but nothing outrageous. I'm planning on putting something a bit more interesting on at some point but this is fine for now (and I haven't got £3k to spare).


PS: Not Scottish but my dad is a Yorkshireman.biggrin

mollytherocker

14,472 posts

240 months

Wednesday 14th September 2011
quotequote all
JW911 said:
Done it.

Works fine with a one inch hole. Tiny bit of drone around 2000rpm under load but nothing outrageous. I'm planning on putting something a bit more interesting on at some point but this is fine for now (and I haven't got £3k to spare).


PS: Not Scottish but my dad is a Yorkshireman.biggrin
Surely you have compromised your exhausts efficiency by doing this and therefore reduced power?

MTR

crisisjez

9,209 posts

236 months

Thursday 15th September 2011
quotequote all
mollytherocker said:
Surely you have compromised your exhausts efficiency by doing this and therefore reduced power?

MTR
Efficency as an exhaust...yes.
As a method of getting hot gasses away from the cylinder head...absolutely not, turbo cars dont need the backpressure like NA cars do.

Sunnysidebb

1,385 posts

198 months

Thursday 15th September 2011
quotequote all
laughlaughlaugh

It was an interesting thread at the time, and at the time I had a standard exhaust fitted. But yo know what, theres no substitute for a tested good sports exhaust. I went for a miltek 100 cell sports exhaust. Glad I did its brilliant and not too loud. it should work well with all the other mods I'm having done.
Frank


RDM

1,860 posts

238 months

Thursday 15th September 2011
quotequote all
Sunnysidebb said:
laughlaughlaugh

It was an interesting thread at the time, and at the time I had a standard exhaust fitted. But yo know what, theres no substitute for a tested good sports exhaust. I went for a miltek 100 cell sports exhaust. Glad I did its brilliant and not too loud. it should work well with all the other mods I'm having done.
Frank
Frank,
Will you have the car back for Sunday?

Sunnysidebb

1,385 posts

198 months

Thursday 15th September 2011
quotequote all
RDM said:
Sunnysidebb said:
laughlaughlaugh

It was an interesting thread at the time, and at the time I had a standard exhaust fitted. But yo know what, theres no substitute for a tested good sports exhaust. I went for a miltek 100 cell sports exhaust. Glad I did its brilliant and not too loud. it should work well with all the other mods I'm having done.
Frank
Frank,
Will you have the car back for Sunday?
Unfortunately not, but I am having quite a lot done. Keeping Ken on his Toeslaugh
Hoping to have it back end of September. Fingers crossed.

Sunnysidebb

1,385 posts

198 months

Thursday 15th September 2011
quotequote all
Sunnysidebb said:
RDM said:
Sunnysidebb said:
laughlaughlaugh

It was an interesting thread at the time, and at the time I had a standard exhaust fitted. But yo know what, theres no substitute for a tested good sports exhaust. I went for a miltek 100 cell sports exhaust. Glad I did its brilliant and not too loud. it should work well with all the other mods I'm having done.
Frank
Frank,
Will you have the car back for Sunday?
Unfortunately not, but I am having quite a lot done. Keeping Ken on his Toeslaugh
Hoping to have it back end of September. Fingers crossed.
ps I'm on nearly every day, reading mostly as there's no point posting for the sake of it. Been a bit busy with the B&B latly so no been on quite as much as I would like frown
However , must make some money, got to pay Ken soon biggrin

daveyb662

1,722 posts

196 months

Thursday 15th September 2011
quotequote all
I am considering doing this soon...anybody know if any issues with MOT, etc...?

From what I have read previously it doesn't effect power - hope I am right on that one!

crisisjez

9,209 posts

236 months

Thursday 15th September 2011
quotequote all
daveyb662 said:
I am considering doing this soon...anybody know if any issues with MOT, etc...?

From what I have read previously it doesn't effect power - hope I am right on that one!
Its droneyfrown

996ttalot

1,931 posts

206 months

Thursday 15th September 2011
quotequote all
The concept should work on a turbo car because the goal is to reduce back pressure. You achieve this through free flowing exhausts, hence aftermarket exhaust options running 100-200 cell cats instead of 400, reduced padding in the mufflers and so on.

Reading the thread it seems that whilst there is no direct increase in bhp, the reduced back pressure results in more power under the curve and spool times. What is is doing is increase boost (probably by around 0.015-0.025 bar (20hp approx) across the boost curve.

Given these exhausts are readily available second hand at less than 300GBP then the worst result is you would be down maybe £500 including fitting to restore.

I know several people that done this when the thread first started and in the end they started making the holes bigger.

The bottom line is that the turbo will provide better performance with straight pipes, no cats. So anything that frees the exhaust up is going to be a good mod.

Regarding drone, we have actually found with several exhausts, that this is increased by using "rolled" tips instead of straight cut. Be interesting if someone actually has a "drone" exhaust to remove the tips, and run the car to see if our findings are repeated.