What brand is this wheel
What brand is this wheel
Author
Discussion

bsw

Original Poster:

27 posts

183 months

Friday 16th September 2011
quotequote all
Hi,

Can anyone tell me what brand / model this wheel is please.

I have just taken the set of a 987 I recently bought and cannot find any name on the inside, only made in Italy and some numbers. I'm planning on selling them and it would make it easier to advertise & value if I knew what they were & cost originally.

Thanks


MadRob6

3,594 posts

251 months

Friday 16th September 2011
quotequote all
Kahn RS-C I believe.

I'm ashamed that I recognised them as Kahn wheels seeing as I hate everything that comes out of that place.

Durzel

13,029 posts

199 months

Friday 16th September 2011
quotequote all
Definitely Kahn looking which would mean the wheel caps (if genuine) probably cost more than the alloys themselves.

6C4GTS

5,186 posts

209 months

Friday 16th September 2011
quotequote all
There must be a lot of these sitting in garages around the country.

MTF - did you manage to punt yours??

bsw

Original Poster:

27 posts

183 months

Friday 16th September 2011
quotequote all
OK thanks for that.

As a matter of interest what is wrong with Kahn ?

I'm new on here so haven't picked up yet on what's "cool" and what isn't.

6C4GTS

5,186 posts

209 months

Friday 16th September 2011
quotequote all
bsw said:
haven't picked up yet on what's "cool"
What have you replaced the Kahn's with???

fioran0

2,410 posts

203 months

Friday 16th September 2011
quotequote all
are they not techart wheels? look like formula 2 forged multi pieces to me or atleast copies of since techarts usually say all over them what they are

6C4GTS

5,186 posts

209 months

Friday 16th September 2011
quotequote all

Durzel

13,029 posts

199 months

Friday 16th September 2011
quotequote all
bsw said:
As a matter of interest what is wrong with Kahn ?
There's probably not an awful lot with the wheels persay, after all Kahn have been around for as long as I can remember so they must be doing something right.

That said when I did first hear of them it was when I had a Vauxhall Astra GTE, and they were basically all over the Max Power magazines with the same generic wheels for all makes and models of boy-racer mobiles. For me Kahn is basically a brand of wheel that screams "cheap" and "generic" and seem inappropriate to fit to a Porsche. I don't think the wheels themselves are particularly light either.

bsw

Original Poster:

27 posts

183 months

Friday 16th September 2011
quotequote all
I've had a look at Kahn's website and I think I can see what you mean with some of their wheels but these are really nice looking but I must admit they are heavier than the standard wheel. Personally I don't like oversize wheels & skinny tyres on anything, even a Porsche, and especially not a range Rover or Cayenne. And that's why they're not on the car any longer.

While on this suject - just what is the supposed benefits of oversize wheels & skinny tyres? To me the Boxster feels nicer on standard rubber and I don't think I'm going to test the limits of the handling on public roads. So what, if anything, am I missing by going back to the standard set-up ?

sportsandclassic

3,774 posts

249 months

Friday 16th September 2011
quotequote all
Hi,

Quite a good idea those type of wheel as the outer chrome part comes off when you split the rim so refurbishment is quick. Done a few on a 996tt years back.

Mike

fioran0

2,410 posts

203 months

Friday 16th September 2011
quotequote all
6C4GTS said:
apologies, techarts dont bolt through the spokes but otherwise look the same. i was just running off memory