5mm wheel spacers with 8.5 and 11.5 wheels
5mm wheel spacers with 8.5 and 11.5 wheels
Author
Discussion

speedyun

Original Poster:

269 posts

236 months

Saturday 17th September 2011
quotequote all
Has anyone done this (on a widebody car)?

I have 5mm spacers on the car now, and am about to fit Sport Classics (i.e. modern interpretation of Fuchs - same size as Carrera Sport wheels - 8.5 55ET and 11.5 50ET). Current wheels are 8 57ET and 11 51ET.

Do I need to remove the spacers? I don't really want to take them off, as the current wheels will go back on when winter comes.

I'm most concerned with contact with the wheelarch (the outer edge of the tyre will be 8mm (F) and 7mm (R) further out compared to current - that's CLOSER to the wheelarch lip). Probably not an issue in daily use, but wheels can get buried in the wheelarch on track.

Pope

2,653 posts

278 months

Saturday 17th September 2011
quotequote all

Permissible summer tyre and wheel sizes (RO = rim offset in mm)

Front: 235/40 ZR 18 (91Y)
Rear: 295/35 ZR 18 (99Y)
8 J x 18, RO 57
11 J x 18, RO 51
Only for 911 Carrera 4.


Front: 235/40 ZR 18 (91Y)
Rear: 295/35 ZR 18 (99Y)
8 J x 18, RO 57
11 J x 18, RO 51
only for 911 Carrera 4,
5-mm spacer, Part No. 997.361.605.90, permitted per wheel,
snow chains cannot be fitted.


Front: 235/35 ZR 19 (87Y)
Rear: 305/30 ZR 19 (102Y) XL
8 J x 19, RO 57
11 J x 19, RO 51
911 Carrera 4 and 911 Carrera 4S,
snow chains cannot be fitted.


Front: 235/35 ZR 19 (87Y)
Rear: 305/30 ZR 19 (102Y) XL
8 J x 19, RO 57
11 J x 19, RO 51
Not for Japan,
911 Carrera 4 and 911 Carrera 4S,

5-mm spacer, Part No. 997.361.605.90, permitted per wheel,
snow chains cannot be fitted.


Front: 235/35 ZR 19 (87Y)
Rear: 305/30 ZR 19 (102Y) XL
8.5 J x 19, RO 55
11.5 J x 19, RO 50
911 Carrera 4 and 911 Carrera 4S,
snow chains cannot be fitted.


(As above, spacers not approved for the widest wheels)
If you are removing the spacers, make sure you have the correct bolts - red anodised cap = 5mm longer bolt; if the spacer comes off you'll need standard, 5mm shorter bolts.

HTH

speedyun

Original Poster:

269 posts

236 months

Saturday 17th September 2011
quotequote all
Excellent - thanks for the detailed reply Pope.

I suspected this might be the case, even though I have heard of cars in the US with 8.5 & 11.5 rims and 5mm spacers (fitted by a US OPC).

Whilst I could probably get away with the rear 5mm spacer (for example GT3 RS has rear rims much closer to the wheelarch), the front would just be too much - looking at my car as is, fitted with 8 & 11 and 5mm spacers the fronts would be too much and the tyres would be easily outside the arches.

Removing the spacers isn't such a hardship - re the grub screws that hold the spacers on, can these simply be reinserted into the hub, or will I need shorter screws?

Re the bolts - I have to buy a new set of black bolts to go with the wheels, so it's just a question of buying the shorter set.

Thanks again.

speedyun

Original Poster:

269 posts

236 months

Saturday 17th September 2011
quotequote all
...I think I've got the answer - I would need to revert to the regular screws, 8 x M6x12 part number 900.269.047.09