Matching Skirting Board
Discussion
We do this a lot - as we have been going quite a while we have a big collection of cutters so can normally bodge most shapes to very close.
Cutters are £40 a set (inc vat), its the labour to muck around with it that costs.
Sounds daft but it took me 3 hours to make 2m of detailed skirting once!
Cutters are £40 a set (inc vat), its the labour to muck around with it that costs.
Sounds daft but it took me 3 hours to make 2m of detailed skirting once!
I have ripped the whole lot out. The door trim has the reeded element to it also and I don't want to start ripping all that out as well. Particualry as I will have to do all the other rooms to make it match.
Its annoying as I can't find anything remotley close. The skirting is original and the house was only built 14 years ago.
I don't want to pay for tooling as I only need a few metres and it just isn't worth it.
Its annoying as I can't find anything remotley close. The skirting is original and the house was only built 14 years ago.
I don't want to pay for tooling as I only need a few metres and it just isn't worth it.
Closest I could get to that would be
http://mdfskirtingboard.co.uk/graphics/mdf_reeded_...
It's triple reeded in relief so could match your architrave profile.
That or it's down the local joiners and a bill to follow.
http://mdfskirtingboard.co.uk/graphics/mdf_reeded_...
It's triple reeded in relief so could match your architrave profile.
That or it's down the local joiners and a bill to follow.
944fan said:
I don't want to pay for tooling as I only need a few metres and it just isn't worth it.
And it takes a long time to make the template, grind the cutters, set the machine etc etc...hence the high price for small quantities as the costs cant be absorbed as they are with larger volumes.Its a problem we often have (see my profile).
Nick

DevaLink- - The house isn't a one off but it has a unusalish history. The original builder went bust very early on in building the houses on the street. Another builder took over who were more used to building large luxury homes so the quality of materials used is very high. I suspect they may have had some skirting made for some of their other properties that may have been custom and had a lot left over and used on our houses. Who knows.
Thanks for all the suggestions. I went to a couple of timber merchants who have a moulding machine. Neither had any cutters to make that profile. One of them siad it was very unusual and would have to be custom made. In the end I found a single ogee board with a chamfered top edge. It is nothing like the original but it matches the rest of the trim reasonably well.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff



