Unusual heater box with extra pipes? - help
Discussion
I don't know for sure, but....
On the S3's and V8S's there are hot air feeds out of the footwells (like S2's) and out of the side screen demister vents (cold fresh air only on S2's), i.e. there are more hot air outlets than on an S2. So it may be that the new heater is from an S3/V8S.
I'm sure that someone else will be along soon to clarify further.
HTH
Bob
On the S3's and V8S's there are hot air feeds out of the footwells (like S2's) and out of the side screen demister vents (cold fresh air only on S2's), i.e. there are more hot air outlets than on an S2. So it may be that the new heater is from an S3/V8S.
I'm sure that someone else will be along soon to clarify further.
HTH
Bob
ok - found norman farmers pics of the dash strip on an s3. look like my old s2 heater box. so now its a search for a v8s dashboard out pic
http://www.gbsportscar.com/s2_dashremoval.htm
http://www.gbsportscar.com/s2_dashremoval.htm
ooo looks like a prototype then. I am tempted to feed fresh air in below the matrix (there's another extra pipe on the opposite side to the fan), fit a divider so fresh air has to go up through the matrix and not escape out of the fan hole and then feed mixed hot cold air from one of the top outlets to just the driver dash vent. This may even reduce condension in the gauges!
Gassing Station | S Series | Top of Page | What's New | My Stuff



