Cars that run 4x100 wheels?

[snotrag]

As above - I have some wheels I need to move on, I want to know where I should be advertising them.

I believe R53 Minis use this size?

[GravelBen]

MX5s, a lot of Hondas.

[Stoatman]

Yep , lots of Hondas.

Try Hondacivicforum , Civiclife , civic5

[mad4amanda]

yes along with some hondas mazda vauxhals and vws you also need the offset ( normally cast in the wheel or stamped on the back in mm could be anything from a negative number upwards, a picture of condition and if they have any damage is critical

[Baked_bean]

mk2 golfs (infact most vw's from the 70's and 80's)

E30 bmw's are another.

[snotrag]

Ben there fitted to my Mazda :wink:

And yes, I have all the sizes etc. They are a set of 17x7 OZ Ultraleggeras in MINT condition, just not really the right size for my car - pity as they are very very nice.

[MrMoonyMan]

http://www.carlsalter.com/wheel_fitments.html

[Herman Toothrot]

Mk1 & mk3 mr2's

[E30Addict]

Maybe try putting an advert on wheelwes.com. IIRC all adverts include PCD so anyone running 4x100 would be able to search by PCD.

[Gizmo!]

Small VWs and Toyotas also.

Be careful of the hub diameter though, some are bigger.

[GC8]

snotrag said:

Ben there fitted to my Mazda :wink:

And yes, I have all the sizes etc. They are a set of 17x7 OZ Ultraleggeras in MINT condition, just not really the right size for my car - pity as they are very very nice.

Thats not all of the sizes. You also need the offset and the centre bore size. This can sometimes be altered using spigot rings, but if its incorrect then the wheels will either not fit on, or theyll be very dangerous (the wheels are mounted on the centre - the studs only secure them).