Engine Prep Time
Discussion
Hi all.
Made a start on my LS7 engine this evening.
Turned the inlet manifold through 180 degrees, rotated the fuel rail, shortened the oil pressure mounting and blanked off, drilled and tapped a new sensor port on the end of the block.
I am enjoying tackling this aspect of the rebuild as it is all new to me. The only engine I have stripped and rebuilt was a mini engine about 34 years ago so you could say I am starting at the deep end!
I should collect the chassis and body on Friday so I can really make some progress.
Paul
Made a start on my LS7 engine this evening.
Turned the inlet manifold through 180 degrees, rotated the fuel rail, shortened the oil pressure mounting and blanked off, drilled and tapped a new sensor port on the end of the block.
I am enjoying tackling this aspect of the rebuild as it is all new to me. The only engine I have stripped and rebuilt was a mini engine about 34 years ago so you could say I am starting at the deep end!
I should collect the chassis and body on Friday so I can really make some progress.
Paul
Gassing Station | Ultima | Top of Page | What's New | My Stuff