Wiper mod...image required.

[LuckyP]

Anyone have a close up pic of where the wiper arm and the wiper pivot meet - taken from side on? Need to see the nut/bolt arrangement.

Ta.

Pete

[LuckyP]

Bumpety-bump?

[Storer]

Don't know if mine has the mod, so not much help really.

Sorry.

Paul

[GTRMikie]

You need to be a bit more specific, Pete. Which wiper mod are you referring to and which pivot?

[V8Dom]

Pete

I dont run the mod nor do I have a problem so sorry cant help with photo..

If its adjusted correctly and the blade the right length you wont have a problem..

My blade is only 14 inch long which is shorter than a few but I havent visability issues either.

Some Blades i have seen on cars are just too long and clear parts of the screen not needed

rainex provides high speed clearing anyway..

Dom

Edited by V8Dom on Sunday 16th October 00:43

[CanAm Dave]

Hi Pete

There are a few pics on the original thread.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Dave

[LuckyP]

GTRMikie said:

You need to be a bit more specific, Pete. Which wiper mod are you referring to and which pivot?

The wiper mod that holds the blade square to the glass.

Side on close up of the nut and bolt arrangement at the pivot of the blade and wiper arm joint.

Thanks.

Pete

[GTRMikie]

Is this what you want?

[LuckyP]

Spot on. Thanks Mike.

The nylock was touching the blade and making the upper end of the blade list from the screen.

And also, the end of the bolt behind was touching the blade carrier too. Hmmm....odd.

Pete