Oil pressure and oil temp gauge

[jdearden]

Looking for one of these and feel the noble one is exspensive being about 180 quid including vat. Not to bothered if it has noble on it. Who actually made these. Or is there any other options.

[mgbond]

jdearden said:

Looking for one of these and feel the noble one is exspensive being about 180 quid including vat. Not to bothered if it has noble on it. Who actually made these. Or is there any other options.

Go to merlin motorsport website

[Blu3R]

..... Where you won't be able to buy one.
They have dual oil pressure and WATER temp but not dual oil/oil.
You could replace your water temp gauge with the dual gauge that they sell and then just buy an oil temp gauge separately, that way you still only need to cut one hole.

Or suffer the cost from Noble

[Hollowpockets]

I don't know why it wasn't standard on all cars, I check the oil temp and pressure every drive to make sure things are right before booting it, on track the gauge highlighted a problem before it done any damage so its well worth it if you don't have one.

[TuxMan]

Sorry to give you bad news james but that price is the gauge only there is another load of bits needed to fit although I'm with Graham on this one it's a must to have especially if you are going on track !!!!

[mgbond]

Blu3R said:

..... Where you won't be able to buy one.
They have dual oil pressure and WATER temp but not dual oil/oil.
You could replace your water temp gauge with the dual gauge that they sell and then just buy an oil temp gauge separately, that way you still only need to cut one hole.

Or suffer the cost from Noble

...Which is not true I brought one and its in my car. I brought a black one and fitted it down on the black part of the center console.

http://www.merlinmotorsport.co.uk/p4125/MOCAL-DUAL...

Bondy

[alex s]

These are the people who did the original gauges. http://www.greengauges.com/stage1.asp.

If you give them a call they can do the dual gauge ( well at least they used too.)

HTH.

Alex

[daddysumo]

I think you will find CAI (Caerbont Automotive)made the gauges.

HTH

[Blu3R]

mgbond said:

Blu3R said:

..... Where you won't be able to buy one.
They have dual oil pressure and WATER temp but not dual oil/oil.
You could replace your water temp gauge with the dual gauge that they sell and then just buy an oil temp gauge separately, that way you still only need to cut one hole.

Or suffer the cost from Noble

...Which is not true I brought one and its in my car. I brought a black one and fitted it down on the black part of the center console.

http://www.merlinmotorsport.co.uk/p4125/MOCAL-DUAL...

Bondy

Well granted, if you want any old gauge that looks nothing like the other 5 you already have then there's probably more than one option.

[alex s]

daddysumo said:

I think you will find CAI (Caerbont Automotive)made the gauges.

HTH

Greengauges is part of CAI - the retail part, to do custom gauges from their range to the GP...

[Plumber1]

TuxMan said:

Sorry to give you bad news james but that price is the gauge only there is another load of bits needed to fit although I'm with Graham on this one it's a must to have especially if you are going on track !!!!

What other parts are required and how easy to install or is it another job for jetstream when my car goes there. ( engine out job)

[AverageMPH]

I had Jetstream fit mine c/w M400 centre dash, looks great with the oil pressure/temp. and boost gauge side-by-side.

Edited by AverageMPH on Thursday 20th October 19:48

[JulesBliss]

I bought the whole kit from Noble.. I seem to remember it was an eye-watering £300 or so

[Lucozade]

AverageMPH said:

I had Jetstream fit mine c/w M400 centre dash, looks great with the oil pressure/temp. and boost gauge side-by-side.

Edited by AverageMPH on Thursday 20th October 19:48

That sounds interesting - you can fit the m400 centre console which I'm presuming will end up with a better looking finish than cutting the current ?

[jdearden]

how much was the m400 centre console cover

[Metalman]

jdearden said:

how much was the m400 centre console cover

Hi James, been trying to email you but it won't go through? It may be worth you contacting me.

[AverageMPH]

Lucozade said:

That sounds interesting - you can fit the m400 centre console which I'm presuming will end up with a better looking finish than cutting the current ?

Yes it looks really neat, Dave at Jetstream did a great job.

Best speak to Jetstream for the price.

I'll post some pictures after I've collected my car.

Edited by AverageMPH on Friday 21st October 17:48