Ignition On - Warning Lights
Discussion
There is also a small pico fuse on the pcb with the Mil light just that two although may need to be unsoldered. Plus the mil light is a LED
I get the buzzer as well. I search this and some people do and some don't. I know my mil work properly as I has a lamba go down and mil light and buzzer whilst driving.
Fuse and LED are easy enough pop down to maplins if your good with a soldering iron
I get the buzzer as well. I search this and some people do and some don't. I know my mil work properly as I has a lamba go down and mil light and buzzer whilst driving.
Fuse and LED are easy enough pop down to maplins if your good with a soldering iron
In 6.5 yrs I've always had the MIL light, the oil pressure light, the battery light and the audible tone come on when i press the black button all of which go out/off when I start the engine. Oh there's the handbrake light too which comes on and off with the handbrake, that's quite good for a Cerb ain't it?
Regards
Simon
Regards
Simon
Edited by SimonKD on Tuesday 25th October 23:07
Never noticed the shutting down beeps but I'm a bit deaf in one ear I say deaf in one ear.
Let's see if the mil comes on with one sensor taken off.
And what's these fancy LEDs. In my day a light was a bulb not some electric gizmo. Answer to another thread about TVR going belly up... LEDs bloody LEDs.
Let's see if the mil comes on with one sensor taken off.
And what's these fancy LEDs. In my day a light was a bulb not some electric gizmo. Answer to another thread about TVR going belly up... LEDs bloody LEDs.
pmessling said:
There is also a small pico fuse on the pcb with the Mil light just that two although may need to be unsoldered. Plus the mil light is a LED
I get the buzzer as well. I search this and some people do and some don't. I know my mil work properly as I has a lamba go down and mil light and buzzer whilst driving.
Fuse and LED are easy enough pop down to maplins if your good with a soldering iron
I had exactly the same until we replaced this fuse then all worked again.I get the buzzer as well. I search this and some people do and some don't. I know my mil work properly as I has a lamba go down and mil light and buzzer whilst driving.
Fuse and LED are easy enough pop down to maplins if your good with a soldering iron
Quick and cheap fix.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



