964 Engine remap recommendations in the South?
964 Engine remap recommendations in the South?
Author
Discussion

badgerracing

Original Poster:

153 posts

260 months

Tuesday 22nd November 2011
quotequote all
Any recommendations on someone to do a good remap on a 964 in the South? Its a C4 with G-pipe and induction kit, so I wasn't sure an off-the-shelf one would show the gains?

Everyone mentions Wayne Schofield (Chipwizards), but he's up in Rochdale....

For off-the-shelf chips

Steve Wong http://www.911chips.com/contact.html
&
ProMax http://www.promaxmotorsport.co.uk/products/73-perf...

have been recommended before.

996ttalot

1,931 posts

206 months

Tuesday 22nd November 2011
quotequote all
badgerracing said:
Any recommendations on someone to do a good remap on a 964 in the South? Its a C4 with G-pipe and induction kit, so I wasn't sure an off-the-shelf one would show the gains?

Everyone mentions Wayne Schofield (Chipwizards), but he's up in Rochdale....

For off-the-shelf chips

Steve Wong http://www.911chips.com/contact.html
&
ProMax http://www.promaxmotorsport.co.uk/products/73-perf...

have been recommended before.
We supply and fit these and you get the power quoted.

http://cargraphic.co.uk/index.php?/s,6,7,18,710,12...

Ken

DAB964RS

214 posts

198 months

Tuesday 22nd November 2011
quotequote all
Bob Watson

He did a live mapping on my 64RS earlier this year - very pleased with the results

www.bobwatsonporsche.co.uk/

cheers

melv

4,708 posts

296 months

Tuesday 22nd November 2011
quotequote all
DAB964RS said:
Bob Watson

He did a live mapping on my 64RS earlier this year - very pleased with the results

www.bobwatsonporsche.co.uk/

cheers
+1 for His Bobship... thumbup

warmfuzzies

4,379 posts

284 months

Tuesday 22nd November 2011
quotequote all
badgerracing said:
Any recommendations on someone to do a good remap on a 964 in the South? Its a C4 with G-pipe and induction kit, so I wasn't sure an off-the-shelf one would show the gains?

Everyone mentions Wayne Schofield (Chipwizards), but he's up in Rochdale....

For off-the-shelf chips

Steve Wong http://www.911chips.com/contact.html
&
ProMax http://www.promaxmotorsport.co.uk/products/73-perf...

have been recommended before.
Be careful of the Promax, it lifted my redline somewhat, now hits almost 7200 on the overrun if i'm not careful.

Kevin

Magic919

14,583 posts

232 months

Tuesday 22nd November 2011
quotequote all
Would any rev limiter be effective on the overrun?

graemel

7,230 posts

248 months

Tuesday 22nd November 2011
quotequote all
Steve Wong chips work very well. Have one in my 3.2 SSE.

thegoose

8,077 posts

241 months

Tuesday 22nd November 2011
quotequote all
warmfuzzies said:
Be careful of the Promax, it lifted my redline somewhat, now hits almost 7200 on the overrun if i'm not careful.

Kevin
That's something I was later told I should have got Wayne to do to my 964 race car (standard engine). Then instead of occasionally holding it on the rev limiter on the approach to a bend it would then go that bit faster and not be bouncing on the limiter, and the engine will take it no problem (so I can't see a problem with it).

cornershop

2,150 posts

227 months

Wednesday 23rd November 2011
quotequote all
DAB964RS said:
Bob Watson

He did a live mapping on my 64RS earlier this year - very pleased with the results

www.bobwatsonporsche.co.uk/

cheers
Was this with Motronic or an aftermarket ECU - I ask as a few years ago, he couldn't map my then standard 3.2C

Found another option for motronic tuning, but not used them and know little about the outfit however the owner spent a good 15-20 mins explaining what they did - http://www.austecporsche.com/porscheupgrades.asp

DAB964RS

214 posts

198 months

Wednesday 23rd November 2011
quotequote all
cornershop said:
Was this with Motronic or an aftermarket ECU - I ask as a few years ago, he couldn't map my then standard 3.2C
standard ECU + cat bypass & cup pipe = 283BHP

cornershop

2,150 posts

227 months

Wednesday 23rd November 2011
quotequote all
DAB964RS said:
standard ECU + cat bypass & cup pipe = 283BHP
interesting, thanks - will get in touch, am due a power run anyway