cat5 hdmi extenders - anyone used them?
Discussion
anonymous said:
[redacted]
Thankyou TN.In general OP, you get what you pay for, and as TN says, check the baluns will give you the spec you want in terms of features / distance and so on. In principle they work veryt well, but like all such things, as they have become more popular, some cheapies have popped up on the scene which can muddy the waters a little bit - fine for shorter runs or limited spec, but not up to the job they should be.
Mr Bristol - Ethernet is a data transmission format. Cat5 is a cable. The OP is asking about baluns to convert HDMi combined A/V digital signals and push them down Cat5e cable and then remux them at the other end.
I use a set of Octava baluns to send 1080i Sky HD to my bedroom TV. They also work fine for 1080p when I tested using the PS3. They use two runs of cat5, and I have a conventional aerial cable to send remote signals back to the Sky box.
My recommendation would be to make sure your cat5 cabling is in very good order, and ideally use shielded cat5e. Mine is unshielded, and although it's good enough for gigabit Ethernet, I get split second HDMI drop outs when things like the microwave or cheap low voltage lights are switched on.
Cheers,
Pete
My recommendation would be to make sure your cat5 cabling is in very good order, and ideally use shielded cat5e. Mine is unshielded, and although it's good enough for gigabit Ethernet, I get split second HDMI drop outs when things like the microwave or cheap low voltage lights are switched on.
Cheers,
Pete
pete said:
Just a clarification - they will not work over power line Ethernet e.g. Homeplug or similar. You need two physical cat5 connections between each adaptor.
Pete
Agree with this, the OP is getting slightly (and it is very common) confused. Just because it uses the CAt5/6 cable does not mean it is converted to a true network/ethernet signal. The vast majority do not. It is just the Cat5/6 cable is very useful as it has 8 individual cables in it which we can use to send signals other than Computer Network.Pete
There is a product called Just-Add-Power, and a couple of copies, that will convert HDMI into an Ethernet signal, but they are costly and not garanteed over PowerLine.
V.
VEX said:
pete said:
Just a clarification - they will not work over power line Ethernet e.g. Homeplug or similar. You need two physical cat5 connections between each adaptor.
Pete
Agree with this, the OP is getting slightly (and it is very common) confused. Just because it uses the CAt5/6 cable does not mean it is converted to a true network/ethernet signal. The vast majority do not. It is just the Cat5/6 cable is very useful as it has 8 individual cables in it which we can use to send signals other than Computer Network.Pete
There is a product called Just-Add-Power, and a couple of copies, that will convert HDMI into an Ethernet signal, but they are costly and not garanteed over PowerLine.
V.
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff




