Can anyone identify these wheels?

[RS1T]

Can anyone identify brand and model of rim shown in the picture?

Thanks in advance

[jkh112]

lenso RS5.
The answer is in the pic! What is the catch?

Edited by jkh112 on Friday 2nd December 21:23

[Garlick]

The chap above isn't wrong

[Zwolf]

jkh112 said:

lenso RS5.
The answer is in the pic? What is the catch?

[Garlick]

Perhaps we're looking at the wheel in the top right?

[RS1T]

Oh thanks guys, knew this was the right place to get help!

Wouldn't have noticed the Lenso in the middle myself :P


Also, does anyone know if these will fit a 1st generation Mazda6?

Edited by RS1T on Friday 2nd December 21:37

[cathalferris]

Editing as I'm very wrong, and apparently half blind tonight..
Good spot on the centre cap.

[Zwolf]

cathalferris said:

Other than a likely manufacturer of Kei Racing I can't help much.
Google Images doesn't show much that look like these..

It does if you type in the same words that are on the wheel pictured in the OP:

[iva cosworth]

cathalferris said:

Other than a likely manufacturer of Kei Racing I can't help much.
Google Images doesn't show much that look like these..

Well done.........correct answer 1 hour ago.

Your answer.......Epic fail.

I quoted that just in time.

[Lippy Kid]

They're based on (i.e, a close copy of) the 2 piece version of the Racing Hart C5.

[Garlick]

Phew. Another taxing question solved.

[Lippy Kid]

Garlick said:

Phew. Another taxing question solved.

Sorry, I couldn't help myself... I used to be quite into Japanese-market wheels, and I have some fairly useless knowledge stored as a result.

Even of the ugly ones, evidently

[PeteSBC]

Also, does anyone know if these will fit a 1st generation Mazda6?


Yes if they are the right PCD and offset...... FFS

[Garlick]

Lippy Kid said:

Garlick said:

Phew. Another taxing question solved.

Sorry, I couldn't help myself... I used to be quite into Japanese-market wheels, and I have some fairly useless knowledge stored as a result.

Even of the ugly ones, evidently

Not aimed at you

I was referring to the OP

[RS1T]

PeteSBC said:

Yes if they are the right PCD and offset...... FFS

The PCD of my car is 5x114, but I can't find any information at all regarding the PCD of the RS5s. The rims are 17s and the multi fit options do appear to accommodate 5 bolt wheels.

I don't know what the FFS was for...did I wrongly assume that one of the largest car communities on the web would know something more than me about the PCD of some obscure wheels?

Edited by RS1T on Friday 2nd December 23:57

[JamieMatthews]

Interwebs says the 5 stud RS5's are 5X100 and 5X114 fitment.

all else fails, try pop one on/bob round the guy selling thems house (if hes local) and see if he'll let you try one on.

[sherbert90]

RS1T said:

The PCD of my car is 5x114, but I can't find any information at all regarding the PCD of the RS5s. The rims are 17s and the multi fit options do appear to accommodate 5 bolt wheels.

I don't know what the FFS was for...did I wrongly assume that one of the largest car communities on the web would know something more than me about the PCD of some obscure wheels?

Edited by RS1T on Friday 2nd December 23:57

Yes, you assumed wrongly, this is a collective of the greatest car minds ever, how dare you ask a question

[PeteSBC]

RS1T said:

The PCD of my car is 5x114, but I can't find any information at all regarding the PCD of the RS5s. The rims are 17s and the multi fit options do appear to accommodate 5 bolt wheels.

I don't know what the FFS was for...did I wrongly assume that one of the largest car communities on the web would know something more than me about the PCD of some obscure wheels?

Edited by RS1T on Friday 2nd December 23:57

I fail to see how you could expect anyone to answer your question from a picture. You are the one that has or has seen the rims so you have more information than anyone on here. If i showed you a picture of an engine out of a scrap car would you be able to tell me how many miles it had done?
See my point?

[Zwolf]

Most wheels have the offset and PCD details on either the wheel centre or inner hub face do they not?

[Alex@POD]

RS1T said:

The PCD of my car is 5x114, but I can't find any information at all regarding the PCD of the RS5s. The rims are 17s and the multi fit options do appear to accommodate 5 bolt wheels.

I don't know what the FFS was for...did I wrongly assume that one of the largest car communities on the web would know something more than me about the PCD of some obscure wheels?

Edited by RS1T on Friday 2nd December 23:57

They are aftermarket wheels, therefore most likely manufactured in different PCD variants... I don't know if the wheels in the picture will fit your car, but you can buy a set of them that does...