Nearly finished when....
Discussion
The so-called trinary switch which keeps the compressor off is located on the receiver-drier which can be accessed by removing the LHS front wheel and removing the lower access panel (the one below the headilght one) an could be shorted temporarily to see if the compressor will cut in by following the wiring diagram in one of the links to the service manuals in the equivalent parts stickie.
The system should be pressure tested with oxygen-free nitrogen before charging it with refrigerant.
The system should be pressure tested with oxygen-free nitrogen before charging it with refrigerant.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




