Cerb Spider Wheel Nuts

[Tomej]

Hi All,

Does anyone know the size of the wheel nuts required to fit Spiders please?

I can find a few places that sell them varying in price from £40 - £100, but nowhere seems to give the size, and some only do 16, whereas I need 20

Thanks

TomeJ

[SimonKD]

TVR Power do them at £1.79 each including VAT.

http://www.tvrpower.co.uk/store/slug/wheel-nut/

That's £35.80 for a full set of 20.

Regards

Simon

[Ireland]

Aren't they off a Jeep ?

I'm fairly sure the info is in the equivalent parts thread up at the top of the Cerbera forum.

[Jcerb]

Racing Green do stainless steel ones which are worth it! Around the £90 mark for 16.

[SimonKD]

Ireland said:

Aren't they off a Jeep ?

I'm fairly sure the info is in the equivalent parts thread up at the top of the Cerbera forum.

Yes they are the same as Jeep ones cus our hubs are Jeep too.

Seem to remember you can get cheap sets from ebay in black, chromed or stainless steel.

No idea on prices though.

Regards
Simon

[petelem]

Are they thread M 12 x 1,5

http://www.ebay.co.uk/itm/20-x-ALLOY-WHEEL-NUTS-TV...

or 1/2" UNF ?

http://www.ebay.co.uk/itm/20-1-2-WHEEL-NUTS-TVR-CE...

both offered for Cerbera !!! Both types can´t fit.

Peter

[optimax sniffer]

1/2" UNF.

Bought a couple of sets recently of ebay for the Tam & Cerb. Whilst they are not as rounded as the originals, they still look fine

[SimonKD]

optimax sniffer said:

1/2" UNF.

Bought a couple of sets recently of ebay for the Tam & Cerb. Whilst they are not as rounded as the originals, they still look fine

What finish/material and what price Ian?

Regards
Simon

[Tomej]

Thanks All.

I see Halfords doing a set of 16 for £19.99 so was going to get those (if I can get the right size ) - the other 4 I was thinking of locking wheel nuts (obviously not all on the same wheel though).

I'll go for 1/2" and let you all know if they fit.

Here's a link for anyone else interested:
http://www.halfords.com/webapp/wcs/stores/servlet/...

[Tomej]

Just received a set off ebay which i bought for £20.

http://www.ebay.co.uk/itm/320781928955?ssPageName=...

But they don't fit. They appear the same size but think the thread is different. Can anyone help please as I'd idally like to send these back and get replacements from them but i can'task them if I don't know whatI need

Many thanks,

[Steve_T]

As per below 1/2" UNF thread, they don't fit as you ordered 12 x 1.5 as the ebay advert says. That's the problem with a lot of these sellers, they have no idea what fits.

Steve.

Edited by Steve_T on Wednesday 29th February 15:52

[Tomej]

Thank You Very Much Stevie.

I have emailed them and they have been very accomodating, hopefully they will be able to help with replacements.

[Steve_T]

Welcome.