Steering Boss

[Darrens]

Hi, sorry to bring this up again, but I still am unable to remove the steering boss. Short of borrowing the local farmers tracter, fastenning a peice of string to the buck and the other to the steering wheel it will not shift. Is their a tool about (screwy thing) to fasten underneath the steering wheel and the other end onto the steering column shaft.

Any ideas
Simple problem causing so much missery

Regards
Darren

[shpub]

Yes you can use a screwy thing. All it will do is rip through the boss and leave the steering wheel in place.

I posted the instructions and that is how to do it. All I can suggest is eat some extra weetabix and go to body building classes. It is incredibly tight!

If you are in any way nampy-pampy with this it would come off!

Steve

Steve

>> Edited by shpub on Sunday 26th May 07:17

[trefor]

... and mind your teeth as when the wheel does come off you'll know about it.

[RCA]

You can use a steering wheel puller which grabs the back of the steering wheel and pushes on the steering column, most garages will have one. I had to do this as mine would not come off, however it did damage the steering wheel due to the fact that the boss was so tight!!!, As I was putting a new boss and steering wheel on this did not really bother me!!
Hope this helps, Good Luck