Throttle Pedal add-ons?
Throttle Pedal add-ons?
Author
Discussion

MC Bodge

Original Poster:

29,636 posts

204 months

Wednesday 28th December 2011
quotequote all
In order to raise the level of the throttle pedal closer to that of the brake pedal during firm braking, I'm considering adding a 'platform'.

I could of course use a piece of plywood, but I was thinking of something more permanent, or steel plate, but would prefer something less slippery when wet.

Something discrete with an element of 'non-slip' would be best

There are various 'boy racer' pedal sets in the likes of Halfords, but they are a bit gaudy and I don't need all 3 pedals.

Any suggestions?

TheHeretic

73,668 posts

284 months

Wednesday 28th December 2011
quotequote all

AlpineWhite

2,164 posts

224 months

Wednesday 28th December 2011
quotequote all
Bit of aluminium plate to give you the height / shape, and a surface like skateboards have? Could be done with wet and dry paper, possibly?

jackh707

2,132 posts

185 months

Wednesday 28th December 2011
quotequote all
learn to heel and toe properly

MC Bodge

Original Poster:

29,636 posts

204 months

Wednesday 28th December 2011
quotequote all
jackh707 said:
learn to heel and toe properly
Thanks for that

LHRFlightman

2,249 posts

199 months

Wednesday 28th December 2011
quotequote all
jackh707 said:
learn to heel and toe properly
In THOSE heels? wink

lankybob

2,168 posts

219 months

Wednesday 28th December 2011
quotequote all
jackh707 said:
learn to heel and toe properly
Did you not think that's what he wanted to do it for?

jackh707

2,132 posts

185 months

Wednesday 28th December 2011
quotequote all
MC Bodge said:
jackh707 said:
learn to heel and toe properly
Thanks for that
Apologies, my answer was a little brash, perhaps you are trying to enjoy the merits of cadence clutching?

James Dean

1,373 posts

194 months

Wednesday 28th December 2011
quotequote all
jackh707 said:
MC Bodge said:
jackh707 said:
learn to heel and toe properly
Thanks for that
Apologies, my answer was a little brash, perhaps you are trying to enjoy the merits of cadence clutching?
laugh

davepoth

29,395 posts

228 months

Wednesday 28th December 2011
quotequote all
MC Bodge said:
In order to raise the level of the throttle pedal closer to that of the brake pedal during firm braking, I'm considering adding a 'platform'.

I could of course use a piece of plywood, but I was thinking of something more permanent, or steel plate, but would prefer something less slippery when wet.

Something discrete with an element of 'non-slip' would be best

There are various 'boy racer' pedal sets in the likes of Halfords, but they are a bit gaudy and I don't need all 3 pedals.

Any suggestions?
There's such a thing as a "Paddy Hopkirk" accelerator pedal, which is endorsed by a rally driver from the '60s so looks awesome. You can use that in combination with the booster block, but you may be able to adjust the brake pedal down instead.

kambites

71,463 posts

250 months

Wednesday 28th December 2011
quotequote all
Can't you just take the pedal off and bend it in a vice? With the aid of a blowtorch if necessary.

ArosaMike

4,913 posts

240 months

Wednesday 28th December 2011
quotequote all
Brake harder?

NightRunner

12,423 posts

223 months

Wednesday 28th December 2011
quotequote all
True to your name OP smile

MC Bodge

Original Poster:

29,636 posts

204 months

Wednesday 28th December 2011
quotequote all
NightRunner said:
True to your name OP smile
this isn't bodging, I intend to do a neat job.

the poorly-chosen name was one I thought of for the Scrapheap Challenge forum years ago....

The Black Flash

13,735 posts

227 months

Thursday 29th December 2011
quotequote all
AlpineWhite said:
Bit of aluminium plate to give you the height / shape, and a surface like skateboards have? Could be done with wet and dry paper, possibly?
Griptape. Piss cheap (or probably free for such a small piece) from any skate shop. Or the likes of Car Builder Solutions sell it. Useful in many situations, but I suspect rather too grippy for a throttle pedal. A rubber pad is what you want, ebay has generic ones for example;
http://www.ebay.co.uk/itm/NEW-UNIVERSAL-PEDAL-RUBB...

Special K

893 posts

188 months

Thursday 29th December 2011
quotequote all
What car is it OP ? Can you adjust the accelerator peddle higher ? You can on some cars, my Dad managed to do this on a Clio Williams for me and it made Toe and Heeling a lot easier to learn smile

Triumph Man

9,586 posts

197 months

Thursday 29th December 2011
quotequote all
Can you get adaptor kits to convert a suspended throttle pedal to a floor mounted one. I.e remove the foot pad and replace with a floor mounted pedal? I much prefer a floor mounted pedal to a suspended one.

McSam

6,753 posts

204 months

Thursday 29th December 2011
quotequote all
ArosaMike said:
Brake harder?
I've tried to make this work in my car, except I need to have my foot so hard down that the ABS is cutting in in the dry. Any less and I can't reach far down enough from the brake get a decent input on the throttle. Some cars just aren't laid out well for it.

sneaky schnell

1,516 posts

234 months

Thursday 29th December 2011
quotequote all
AlpineWhite said:
Bit of aluminium plate to give you the height / shape, and a surface like skateboards have? Could be done with wet and dry paper, possibly?
I don't recommend the grip-tape skateboards have. It would damage your shoes quite badly.

MC Bodge

Original Poster:

29,636 posts

204 months

Thursday 29th December 2011
quotequote all
The car in question is a Mk4 Mondeo. The brakes are very sharp and the brake pedal very high, even if I execute a full-on, whiplash-inducing, auto-hazard-light-flashing, emergency stop.

For those who are concerned for me, I can heel & toe in other cars.