Problem solved-Clutch Slave Cylinders available

[schimg]

I understand that are 50 or so Cerbs/Tuscans awaiting replacement Clutch Master Cylinders and that there is a problem with supply?

If you are in this situation, I am aware that a number of these items have been produced and are now available,costing in the region of £178.00 + VAT per set.

For more information contact Howard Watkins : [e-mail]

And no I am not on commision but don't want to see fellow ph's in a fix!

Hope this is of some use.

Steve. G.

[carl_w]

So are these Master or Slave cylinders

[schimg]

Apologies slave cylinders!

Steve.G.

[TVR Slag's BiL]

BAMF (A.K.A FLUFFY) went in for the slave cylinder on Monday. Didnt have any problems with supply and if it was not for other cosmetic work being carried out she would have been back on TVR SLAG's drive by Wednesday!

[joospeed]

LMAO. you wait for factory slave cylinders and then lots of independant suppliers come along at once .. slave cylinder supply not a problem as you say, everybody now has their own supply

slave cylinder seals in better quality rubber now available also... supplying to TVR dealers who are taking them like lightning!!

what we need now tho is a supply of cheap reliable clutch units

[Moog]

Accepting other independents are perhaps supplying, the replacement clutch slave parts on offer are of the highest possible quality.

Geometry of the outer sleeve and piston of each one made is measured during the manufacturing process, and if required can be issued with a certificate of conformity.

Ovality is minimal, giving greater seal integrity.It's no good fitting great seal's in parts if they are not machined to first class levels to start with. All 3 part sections are available within 24 hours, and fit Cerbera speed 6, V8, & Tuscan 6 cyl's.