More Indentification - More door bits?

[jellison]

Anyone know what these bits are:-





Not sure if needed as part of the door (even if they do, most likely need to be replaced).

Anyone got a pick showing how they fit in?

[Adrian@]

The pictures of the spreader plates that attaches to the alloy runner
(via pan head 2ba bolts on each end) and the inner door shell frame and are
'spread' from under the door using a socket and extension bar ..these set the
'rake' or angle of attack of the top of the frame to the shell.
Attach one half to the alloy/drop through the door/attach the other half to
the inner door /then attach spreader bolts with penny washer from under the
door/set attack (you should have a method of attaching the alloy frame to the
top of the door...I am unsure of what is on that car as the method changed

Part of the email when I replied your PM (I am not sure who I am sending to as there are 2 of you posting)
BUT I could not read your attachment.
Adrian@

[wulmar]

here you go

[jellison]

Many thanks