How can I shut her up!

[Moonlite Fingers]

I never thought i would be asking this but my Tam will not get past the 105 db limit at most tracks.

I don't own any baffled and i am no mood to put a quieter exhaust on my baby.

Anyone got any ideas to get me past those nasty men with their little gadgets?

[dickieandjulie]

Track silencers! Mine makes 103 normally (JP system) and 58 with the silencers fitted

Mine are from ACT with a tube welded on that fits inside the rolled edge of the exhaust tip which has a hole in it and a captive nut.

[blackiepaul]

dickieandjulie said:

Track silencers! Mine makes 103 normally (JP system) and 58 with the silencers fitted

Mine are from ACT with a tube welded on that fits inside the rolled edge of the exhaust tip which has a hole in it and a captive nut.

Are you serious - 103 to 58? That sounds one hell of a jump down in noise. 103 to 98 or mid 90's might be about right with out totally strangling your engine - all in my humble opinion of course.

[dbv8]

My milkmans float makes more than that

[SeiW500]

[[quote=Moonlite Fingers]
I don't own any baffled and i am no mood to put a quieter exhaust on my baby.
quote]
How the hell are you going to reduce the noise then........(Bangs Head!!!!!)
Just fit standard can for TD's & fit power cans back after, it's not a hard job.......simples!

[Buzz Billsberry]

It definately won't be 58. 90's sound more like iut. The dB meter must be out of calibration or it was done at the incorrect distance/angle from the exhaust as per MSA regs


Buzz

[dickieandjulie]

Clear typo...98 or was it 95? Either way, significant drop, takes two minutes to fit and allow you to enjoy the normal noise the rest of the time!

[Sevenman]

dickieandjulie said:

Track silencers! Mine makes 103 normally (JP system) and 58 with the silencers fitted

Mine are from ACT with a tube welded on that fits inside the rolled edge of the exhaust tip which has a hole in it and a captive nut.

Do you have any pictures of this setup?

I have the JP exchaust on my Tamora and intend to do some tracksdays so need a solution to the noise issue - this could be it.