964 and 993 cup seam weld strengthening diagrams wanted
Discussion
The details are supposedly in the factory workshop manual, I'll have a look later tonight.
Although it's about the Carrera Cup US cars, this site provides a lot of info - http://www.carreracupusa.org/
Although it's about the Carrera Cup US cars, this site provides a lot of info - http://www.carreracupusa.org/
ian964 said:
The details are supposedly in the factory workshop manual, I'll have a look later tonight.
Although it's about the Carrera Cup US cars, this site provides a lot of info - http://www.carreracupusa.org/
Thanks mate , it would be great to know the details of the welds and strengthening .Although it's about the Carrera Cup US cars, this site provides a lot of info - http://www.carreracupusa.org/
I await eagerly ...
Slippydiff said:
slippydiff if there were any virgins left in surrey i would sacrifice several of them to you . Thank you so very much thats a great resource , im very grateful , cheers 
edited to add i cant find page 236 ( sorry ) im sure its me .
Edited by wtdoom on Thursday 12th January 20:14
wtdoom said:
slippydiff if there were any virgins left in surrey i would sacrifice several of them to you . Thank you so very much thats a great resource , im very grateful , cheers
edited to add i cant find page 236 ( sorry ) im sure its me .
It'll take a bit of time, but I'll take some screen shots and post them later if I get time. edited to add i cant find page 236 ( sorry ) im sure its me .
Edited by wtdoom on Thursday 12th January 20:14
I know you're a bit of a night owl
Slippydiff said:
wtdoom said:
slippydiff if there were any virgins left in surrey i would sacrifice several of them to you . Thank you so very much thats a great resource , im very grateful , cheers
edited to add i cant find page 236 ( sorry ) im sure its me .
It'll take a bit of time, but I'll take some screen shots and post them later if I get time. edited to add i cant find page 236 ( sorry ) im sure its me .
Edited by wtdoom on Thursday 12th January 20:14
I know you're a bit of a night owl
thanks again
b
wtdoom said:
Anyone know where I can get information on seam welding/strengthening 964 and 993 chassis to cup spec please ?
Great reference Slippy. WTD you realise you will have to bare metal the shell to do it properly. Weld penetration etc and underseal don't mix. Exactly the same process with my 3.2 SSEwtdoom said:
or give me the page refrence wotsit . you know 50 111 etc ?
thanks again
b
B.No worriesthanks again
b
There's no need for all that stuff. Try this :
Click on the link I posted previously. It will automatically start to download the PDF file. Just be aware it may take a few minutes (two or three) to download to your PC as it's a fair size file.
Once it's downloaded it will automatically open and you should have a a box at the top or bottom of the page with arrows etc, which allows you to scroll up or down through the pages. The box will also allow you to increase or reduce the page size.
Scroll down to page 236 and all you desire awaits . . .
graemel said:
Great reference Slippy. WTD you realise you will have to bare metal the shell to do it properly. Weld penetration etc and underseal don't mix. Exactly the same process with my 3.2 SSE
'Tis good stuff Graeme (I haven't forgotten the copy of the Yellowbird disc I promised you, did you want it on CD or good old fashioned videotape ?)graemel said:
Great reference Slippy. WTD you realise you will have to bare metal the shell to do it properly. Weld penetration etc and underseal don't mix. Exactly the same process with my 3.2 SSE
yes indeed , im sending the car away after the silverstone track day on the 4th feb . thank you .marky911 said:
Hey Baf, tell me this is for the silver one, not the blue one. 
correct GT Two said:
Baf I have some pics of this done to 964s somewhere along with a copy of the manual.
please im running out of time Slippydiff said:
B.No worries
There's no need for all that stuff. Try this :
Click on the link I posted previously. It will automatically start to download the PDF file. Just be aware it may take a few minutes (two or three) to download to your PC as it's a fair size file.
Once it's downloaded it will automatically open and you should have a a box at the top or bottom of the page with arrows etc, which allows you to scroll up or down through the pages. The box will also allow you to increase or reduce the page size.
Scroll down to page 236 and all you desire awaits . . .
mate you are up there with " andre the giant " as far as im concerned .There's no need for all that stuff. Try this :
Click on the link I posted previously. It will automatically start to download the PDF file. Just be aware it may take a few minutes (two or three) to download to your PC as it's a fair size file.
Once it's downloaded it will automatically open and you should have a a box at the top or bottom of the page with arrows etc, which allows you to scroll up or down through the pages. The box will also allow you to increase or reduce the page size.
Scroll down to page 236 and all you desire awaits . . .
thank you very much
wtdoom said:
marky911 said:
Hey Baf, tell me this is for the silver one, not the blue one.
correct Sorry to pester you. God loves a tryer.
wtdoom said:
Slippydiff said:
slippydiff if there were any virgins left in surrey i would sacrifice several of them to you . Thank you so very much thats a great resource , im very grateful , cheers edited to add i cant find page 236 ( sorry ) im sure its me .
Edited by wtdoom on Thursday 12th January 20:14
- see you Sat. 
marky911 said:
Ok cheers. I didn't know if you got my reply at the weekend. Looking at your plans for the silver one I can see how you might need the blue one sitting there as reserve. No probs, just let me know when you decide.
Sorry to pester you. God loves a tryer.
you are about 10th in line for that blue car ...Sorry to pester you. God loves a tryer.
sorry .
Gassing Station | Porsche General | Top of Page | What's New | My Stuff