Wind noise!
Author
Discussion

mdrc

Original Poster:

446 posts

302 months

Wednesday 18th January 2012
quotequote all
That is from the top edge of the drivers door.....at about 85-90mph.....has anyone experienced this and, or found a solution? Don't think it's window adjustment - more that the seal begins to fail at higher speed.....wondered if some sort of Velcro strip might work along top edge?

Adrian W

15,449 posts

257 months

Wednesday 18th January 2012
quotequote all
mdrc said:
That is from the top edge of the drivers door.....at about 85-90mph.....has anyone experienced this and, or found a solution? Don't think it's window adjustment - more that the seal begins to fail at higher speed.....wondered if some sort of Velcro strip might work along top edge?
Bend the door in a bit

mdrc

Original Poster:

446 posts

302 months

Wednesday 18th January 2012
quotequote all
Is there a technique to 'bending the door'?!

joust

14,622 posts

288 months

Wednesday 18th January 2012
quotequote all
If you have the air-con on fresh air, and haven't diverted some of the front inlet hoses for brakes/tunnel cooling mod, then it is generally the amount of air being rammed into the cabin from the front vents that then pushes the door seals outwards and hence the noise.

Either turn it to recirc, or take the non-blanked hoses off the front inlet scoop and use them for something else.

Gadgeroonie

5,362 posts

265 months

Wednesday 18th January 2012
quotequote all
simple solution is to get some washer pipe

lay it in the fold of the door seal

and now the door will seal perfectly

if it is the right fit - glue it or tape it in position

SIMPLES !

Hollowpockets

5,910 posts

245 months

Wednesday 18th January 2012
quotequote all
joust said:
If you have the air-con on fresh air, and haven't diverted some of the front inlet hoses for brakes/tunnel cooling mod, then it is generally the amount of air being rammed into the cabin from the front vents that then pushes the door seals outwards and hence the noise.

Either turn it to recirc, or take the non-blanked hoses off the front inlet scoop and use them for something else.
I've done this and it still happens, i think it's the low pressure outside the window creating a vacuum and pulling the window out.

I fitted larger seals which has helped but still get it at 120+, might throw a length of silicone vacuum hose in the top edge of the seal. Only passenger side for me.

Scooby P1

2,617 posts

258 months

Wednesday 18th January 2012
quotequote all
Drivers side for me, but it improved when the door was adjusted to shut a bit higher. mine had slipped and was catching on the door shut mechanism.

still happens over 110mph but drivers side only.

mind you, my Impreza is the same so i am used to it now!!

5paulmv

1,250 posts

200 months

Wednesday 18th January 2012
quotequote all
its known as the joys of low build audis n bmw dont have it

arabian

503 posts

204 months

Thursday 19th January 2012
quotequote all
i normally wind the window up......laugh

TIGERSIX

969 posts

260 months

Thursday 19th January 2012
quotequote all
Adrian W said:
Bend the door in a bit
You have spent to much time with me in Norfolk AW thats a proper agri term boibiggrin