new run of wedge veneers
Discussion
Oh god he is off again 
Cannot remember how many i have done now but there must be a thousand left to do
There is some old threads covering the previous runs but i attached some pics of my 400se dash with its new veneer stuck on.
There has been some interest recently and i will go back through the previous posts to find them (hopefully)
But if you are interested post the type of car 350/all the SE models and year and i will set the wheels in motion once i have interest from at least 8 or 9, which keeps the costs down.
any questions ask me
Hotty
now
was
I am the first 350i 87 square clock
Cannot remember how many i have done now but there must be a thousand left to do
There is some old threads covering the previous runs but i attached some pics of my 400se dash with its new veneer stuck on.
There has been some interest recently and i will go back through the previous posts to find them (hopefully)
But if you are interested post the type of car 350/all the SE models and year and i will set the wheels in motion once i have interest from at least 8 or 9, which keeps the costs down.
any questions ask me
Hotty
now
was
I am the first 350i 87 square clock
Edited by HOTTY on Saturday 21st January 01:50
mikeb said:
Stick me down for the glove box, centre clock panel and speedo panel please. '86 420 SEAC. What do you need from me to get them cut - apart from some loot.
MikeyB
Yes I would need the centre metal cover (not the bit with the dails in) as i did a set for Wayne who had the blue SEAC (now with andy tank) and the veneer was based on a carbon veneer he had given me as a template, unfortunately it was wrong. I think Andy found out when he tried to fit it BUT.......If Andy can confirm the replacement veneer for his wifes 280i special fitted on his SEAC, then i already have the pattern (glove box and RPM bit i already know).MikeyB
Anyway if this does not pan out regarding above I am in Cardiff Friday for a meeting at 10am, we could meet or i could collect after ?
Hotty
I can do just sections if you really want, on the square clock 350 it's the easiest one to do but it will not match the glove box or main rpm bit.
You can stick the new veneer onto your existing veneer fronts as long as they are sound, i will post pics of my square clock 350i dash.
If anybody wants a sample, a little square of the material, just email me your address.
I don't have any cut yet, need to find some numbers which tells me what to get run (you dont have to pay until i post them out).
You can stick the new veneer onto your existing veneer fronts as long as they are sound, i will post pics of my square clock 350i dash.
If anybody wants a sample, a little square of the material, just email me your address.
I don't have any cut yet, need to find some numbers which tells me what to get run (you dont have to pay until i post them out).
The Hatter said:
I need a set for my '86 SEAC too...
I assume they're the same as Andy's 280 auto and MikeB's SEAC.
Martin.
Hi Matin by the look of the centre console yes but i will send you a paper template of MikeB's once i have it to check.I assume they're the same as Andy's 280 auto and MikeB's SEAC.
Martin.
You are missing the metal plate backing from the glove box normally the veneer is stuck to this then the whole plate is held on with nuts from the back.
Looks like something has been stuck directly onto the lid (signs of glue)
These veneers will need the metal plate.
hotty
HOTTY said:
I can do just sections if you really want, on the square clock 350 it's the easiest one to do but it will not match the glove box or main rpm bit.
You can stick the new veneer onto your existing veneer fronts as long as they are sound, i will post pics of my square clock 350i dash.
If anybody wants a sample, a little square of the material, just email me your address.
I don't have any cut yet, need to find some numbers which tells me what to get run (you dont have to pay until i post them out).
Stephen,You can stick the new veneer onto your existing veneer fronts as long as they are sound, i will post pics of my square clock 350i dash.
If anybody wants a sample, a little square of the material, just email me your address.
I don't have any cut yet, need to find some numbers which tells me what to get run (you dont have to pay until i post them out).
As long as it's not outrageously dark or light I'm not too fussed. The glovebox is lighter than the dash, so they don't match anyway.
Do you need me to send a template (or even the metal backing plate) to work from? Or would I need to cut the holes out myself?
Andy
Need a few more full sets to make it work, cost wise.
I post up my 350 dash but cannot get better pics until the weekend.
The list so far (remember if you dont like the sample or the expected cost it's ok)
me 350i full set (for another 350 not the one shown)
hatter seac full set
mikeb seac full set
combine seac ?
wavey 350 full set
voltage maxx 350 full set
nac1 350 centre only
gary350i 350 centre only
These veneers are fully finished and only require to be fitted, no sanding or polishing.
Anybody remotely interested email me and i will send a sample, hopefully to convice you to put you name down.
No cash until i have them ready to carrier out to you, so if you change your mind OK (except the seac specials)
I post up my 350 dash but cannot get better pics until the weekend.
The list so far (remember if you dont like the sample or the expected cost it's ok)
me 350i full set (for another 350 not the one shown)
hatter seac full set
mikeb seac full set
combine seac ?
wavey 350 full set
voltage maxx 350 full set
nac1 350 centre only
gary350i 350 centre only
These veneers are fully finished and only require to be fitted, no sanding or polishing.
Anybody remotely interested email me and i will send a sample, hopefully to convice you to put you name down.
No cash until i have them ready to carrier out to you, so if you change your mind OK (except the seac specials)
Gassing Station | Wedges | Top of Page | What's New | My Stuff