Does a decat increase the noise significantly?
Discussion
To be fair, I found a lot of the noise is added when on load, although it does increase at idle a little (the note sounds much harder).. But then I had a custom exhaust made up for the car which is quieter than the sports pipes that were on there to start with.. its now quieter than the sports pipes but makes a better noise than they ever did
(though it sounded a bit s
t before the decats)...
Heatsoak seems massively reduced too, the gearknob barely gets hot like it used to and the gear shift seems better
(though it sounded a bit s
t before the decats)...Heatsoak seems massively reduced too, the gearknob barely gets hot like it used to and the gear shift seems better
Had a chat with Tim (very nice bloke!) He said I will get a noise increase but difficult to be specific as the cats can create noise too.
I think it would be good to try and experience another Cerb with standard exhaust but de-catted, anyone in the south (preferably Surrey/Sussex/Kent direction) got this that could take me for a spin and compare?
I think it would be good to try and experience another Cerb with standard exhaust but de-catted, anyone in the south (preferably Surrey/Sussex/Kent direction) got this that could take me for a spin and compare?
Gazzab said:
Not worth listening to another car as the variables re systems etc are massive.
If you don't want more noise then don't decat (without sorting quieter system). Try decat and standard rear cans?
If you want lower temp then if not decat you need to sort the manifolds.
Not sure I follow you there?If you don't want more noise then don't decat (without sorting quieter system). Try decat and standard rear cans?
If you want lower temp then if not decat you need to sort the manifolds.
Decat and standard rear is what I am talking about (although rear box whereas you says cans?)
What do you mean by sort the manifolds? They were welded a year ago and wrapped so no expecting any issues with them.
I'm wondering how much of the 'noise' I get is just road noise, induction roar etc and nothing to do with the exhaust/cats anyway.
Mark
Mags said:
Gazzab said:
Not worth listening to another car as the variables re systems etc are massive.
If you don't want more noise then don't decat (without sorting quieter system). Try decat and standard rear cans?
If you want lower temp then if not decat you need to sort the manifolds.
Not sure I follow you there?If you don't want more noise then don't decat (without sorting quieter system). Try decat and standard rear cans?
If you want lower temp then if not decat you need to sort the manifolds.
Decat and standard rear is what I am talking about (although rear box whereas you says cans?)
What do you mean by sort the manifolds? They were welded a year ago and wrapped so no expecting any issues with them.
I'm wondering how much of the 'noise' I get is just road noise, induction roar etc and nothing to do with the exhaust/cats anyway.
Mark
You can get manfiolds painted in a coating that reduces under bonnet temps. Wrapping them is likely to hasten there demise.
Id happily take you for a spin Mark, but I've got ACT's Big Bore system as well as decatted, and I'm running 888s (now that's a noisy tyre for you!). Having said that, TBH, I must be going deaf in my old age because I've done a few inter Continental trips and never thought the noise was unbearable.
I have a 4.5 with ACT decats, ACT manifolds as well, standard rear box. I have to say that the noise is significantly louder under load. I'm not keen on the sound either. Outside the car at idle it sounds a bit deeper but it's not worth the noise and drone for me.
That said I've not put many miles on to really evaluate but as I plan to track the car I'm thinking of removing them soon.
That said I've not put many miles on to really evaluate but as I plan to track the car I'm thinking of removing them soon.
Edited by Rawhide on Monday 23 January 15:06
I would suggest comparisons to other cars where induction, exhaust, engine, mainfolds etc might be different wont give you a comparable test.
The received wisdom is that standard exhaust and standard manifolds but with decat is a good thing and not too loud. Just a bit louder. Some linked decats will reduce it further.
The received wisdom is that standard exhaust and standard manifolds but with decat is a good thing and not too loud. Just a bit louder. Some linked decats will reduce it further.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




