Anyone interested in TVR logo wheel centres??
Discussion
Having been told by TVR they are no longer available and the Tuscan ones dont fit as they are too big, I am going to look into having some made. I have a mate that can do this sort of thing and am going to get prices, who would be interested in a set assuming they are not too expensive to have made??? I would imagine the more people interested the cheaper they will be.
I would think we could specify colours to have them colour coded to the car etc... anyone on here interested?
Later
Mike
I would think we could specify colours to have them colour coded to the car etc... anyone on here interested?
Later
Mike
kentishS2 said:
Mike,
I'd be interested depending on the price of course.
Silver/black is good for me but I'd have to measure the dia. of the wheels centres on my CAM295's.
What are the diameter of yours Mike?
IIRC they're standard 8 spoke OZ on your V8S?
I roughly measured them this morning and the centres are around 45mm on the OZ S Series wheels! Let me know what size your centres are, I think its the initial set up that costs so changing size shouldnt be an issue!
Mike
V8Smith said:
Mike,
I'd be interested depending on the price of course.
Silver/black is good for me but I'd have to measure the dia. of the wheels centres on my CAM295's.
What are the diameter of yours Mike?
IIRC they're standard 8 spoke OZ on your V8S?
I roughly measured them this morning and the centres are around 45mm on the OZ S Series wheels! Let me know what size your centres are, I think its the initial set up that costs so changing size shouldnt be an issue!
Mike
Thanks Mike, I'll stick a tape measure across them tonight.
Excuse my ignorance (!) but would these be suitable for anyone changing to Spider alloys?? I seem to remember reading that someone had done this on a Griff but needed to obtain centres....
Just thought you might want to post elsewhere and get more interest...??
If not, I'll just get my coat, and shut up.....
Just thought you might want to post elsewhere and get more interest...??
If not, I'll just get my coat, and shut up.....
kentishS2 said:
kentishS2 said:
Mike,
I'd be interested depending on the price of course.
Silver/black is good for me but I'd have to measure the dia. of the wheels centres on my CAM295's.
What are the diameter of yours Mike?
IIRC they're standard 8 spoke OZ on your V8S?
I roughly measured them this morning and the centres are around 45mm on the OZ S Series wheels! Let me know what size your centres are, I think its the initial set up that costs so changing size shouldnt be an issue!
Mike
Thanks Mike, I'll stick a tape measure across them tonight.
Mike,
Mine were around 59/60mm diameter, so pretty big!
I'll have to pop one out and measure the hole to be 100% accurate though.
Cheers,
Kevin
kentishS2 said:
Does anyone know whether these are available in 60mm diameter. Is there any other Tiv using a wheel with this size of wheel centre, perhaps the tuscan?
A set of these in silver/black will finish off my 17" rims very nicely.
>> Edited by kentishS2 on Saturday 14th August 23:27
Kevin,
60mm Black with Silver logo are available from TVR-Power, Im taking a set to the meet today in case you can get there.
Mike
v8smith said:
Does anyone know whether these are available in 60mm diameter. Is there any other Tiv using a wheel with this size of wheel centre, perhaps the tuscan?
A set of these in silver/black will finish off my 17" rims very nicely.
>> Edited by kentishS2 on Saturday 14th August 23:27
Kevin,
60mm Black with Silver logo are available from TVR-Power, Im taking a set to the meet today in case you can get there.
Mike
Thanks Mike but unfortunately I have been packng up the house most of the day with my wife, gettiing ready for next week. I did get a chance to have a play with the car for a while and a quick spin too!
Are you able to post me a set Mike and I can send you a cheque?
Cheers,
Kevin
Gassing Station | S Series | Top of Page | What's New | My Stuff