Make My Exhaust Quieter
Discussion
Hi there.
I just fitted at 2.5" stainless steel exhaust system to my Gen 1 Mini Cooper S - http://goo.gl/B3Ycn - this is up 1/4" from stock and I am finding it too loud. It pops and splutters a lot more than the stock exhaust, and drones at certain revs
Does anyone have anything that I could do to quieten it down a little?
Thanks in advance.
TD
I just fitted at 2.5" stainless steel exhaust system to my Gen 1 Mini Cooper S - http://goo.gl/B3Ycn - this is up 1/4" from stock and I am finding it too loud. It pops and splutters a lot more than the stock exhaust, and drones at certain revs
Does anyone have anything that I could do to quieten it down a little?
Thanks in advance.
TD
To give you a helpful response, you could try a couple of bungs, they will make it quiter but they don't especially look very sexy - http://www.haywardandscott.com/various/exhaust-bun...
Or, as others have said, it looks like a cheapy ebay special. Had you gone with a branded one you could have chosen something quieter.
Or, as others have said, it looks like a cheapy ebay special. Had you gone with a branded one you could have chosen something quieter.
I had a "droning" noise from the stainless steel Scorpion exhaust on my old quattro so i bought a roll of sound insulation off ebay and stuck it to the boot floor (under the carpet) and under the rear seats.
Wasn't a 100% cure but it certainally took the "bass" out of the drone and the family would go in it after that.
Wasn't a 100% cure but it certainally took the "bass" out of the drone and the family would go in it after that.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


