Screen washer not working
Discussion
I'm hoping its something really simple and quick to fix, but my screenwasher doesn't appear to be working. Whenever I try to wash my screen nothing comes onto the windscreen. It makes the right noise, but nothing. I checked under the bonnet and its all in the engine bay somehow.
I'm guessing its a loose connection somewhere, but no idea! Any ideas?
Its a bit long winded, sorry!
I'm guessing its a loose connection somewhere, but no idea! Any ideas?
Its a bit long winded, sorry!
Most likely a blocked pump filter (assuming there is actually fluid in your bottle).
On older cars these gunge up , you'll need to pop the pump out of the reservoir and clean up the little gauze mesh filter. The bottles on most cars now are accessed by removing the wheel arch liner. Not sure where it is on yours though.
Failing that, try popping the hoses off of the end of the washer jets and seeing if water flows. Might be as simple as blocked washer jets.
On older cars these gunge up , you'll need to pop the pump out of the reservoir and clean up the little gauze mesh filter. The bottles on most cars now are accessed by removing the wheel arch liner. Not sure where it is on yours though.
Failing that, try popping the hoses off of the end of the washer jets and seeing if water flows. Might be as simple as blocked washer jets.
Luckily you had you car details in your profile as you seemed to have forgotten that rather important bit of info.
Anyway, pull back you bonnet soundproofing and you'll see the plastic hoses that lead to the jets.
Activate the pump and look for leaks as the pipes are quite brittle and shatter in cold weather.
Anyway, pull back you bonnet soundproofing and you'll see the plastic hoses that lead to the jets.
Activate the pump and look for leaks as the pipes are quite brittle and shatter in cold weather.
Origin Unknown said:
sparks_E39 said:
The E39 suffers with pipes expanding in the cold and coming off the attaching pipe. Look under the casing on the underside of the bonnet, and re-attach. Other than that your screenwash is probably frozen.
Had exactly this problem yesterday and this was the fix.
sparks_E39 said:
The E39 suffers with pipes expanding in the cold and coming off the attaching pipe. Look under the casing on the underside of the bonnet, and re-attach. Other than that your screenwash is probably frozen.
Finally got round to having a look, and this was it. Pipe on the drivers side of the bonnet had come apart. Good to finally not have to wash it by hand!Thanks
.Gassing Station | BMW General | Top of Page | What's New | My Stuff



