L322 EAS rear cross link valve location???

[Pvapour]

anyone know where it is? seen the video from RSW on 'how to depresurize' the front cross link valve, but i need to get to the rear.

got a hard fault due to lifting the rear of the car with a heavy trailer

I've unhitched the trailer but I'm left with the rear frozen in an unbelievably high state so need to manually lower the rear to a safe level so I can get to a LR dealer for an EAS reset.

looks quite cool though, sort of hot rod stylee due to front being at normal level, will take a pic before lower.

so anyone know where the rear cross link valve is?

cheers in advance

nik

[camel_landy]

Have a quick flick through this:

http://www.fullfatrr.com/forum/post89598.html

If it isn't exactly what you need, it may well point you in the right direction.

HTH

M

[Pvapour]

thanks camel, not seen that forum before am on lanrovers.net & rangerovers.net

like most other threads though, it only talks of where the front cross link valve is

will keep searching...

[Mroad]

According to the workshop manual you need to remove the RH rear wheel arch liner to get to the valve.

[Pvapour]

thanks Mroad, quite difficult to get at, or I could while the suspension was so high but thought about how would I do the joint back up as the car lowered

so managed to bleed it at the resevoir dist. block, much much easier to get to

now at dealers for a reset, fingers x nothing else failed.