Advise Please , any further parts i should have to hand
Discussion
Hi Guys
Well hopefully i should get the car running this weekend, but was thinking that when i read though Mason (previous owner) thread, the car was badly over fueling and pooring out black smoke, so what additional parts should i have to hand?, also he adjusted the air flow metre, how do i reset?, sorry for all the question, but you guys have been a great help so far and so thought i,ll ask.
Many thanks
Ralph
Well hopefully i should get the car running this weekend, but was thinking that when i read though Mason (previous owner) thread, the car was badly over fueling and pooring out black smoke, so what additional parts should i have to hand?, also he adjusted the air flow metre, how do i reset?, sorry for all the question, but you guys have been a great help so far and so thought i,ll ask.
Many thanks
Ralph
Ralph.When i bought my car it had ben standing for 4 years.After replacing exhaust system..Could not get emmissions down.Over fuelling.Took it to a local respected garage who adjusted fuelling in the air flow meter and set up the car on thier rolling road.Sorry cant help any more than that.Sure you will get there ..Mike
Solitude said:
Jubilee clips, tie-wraps and string !!
and a bloody big hammer lol, what a nightmare trying to get these parts, as soon as i say TVR, o no sir we dont have them, reply. its a Rover 3.5 V8 and you sell them parts do you, yes sir we do but not for a Tvr .
So could anyone please help, is my engine a vitesse lump and is there someone in the trade that you can recommend i use, as so far they about as usefull as a chocolate tea pot
Mr Tank said:
Ralph
Don't worry about what else you need or what else can be faulty (Remindes me to much of somebody else on her)
Just fit the new starter and see what happens then.
If it runs OK let it warm up and then give it a blast and see if what its like after that!
Then you can worry!
Andy
O dear sorry lol, am not worried Andy, just trying to cover bases mate just so i can take it for a spin as never driven a wedge, so am dying to try, here's hoping.Don't worry about what else you need or what else can be faulty (Remindes me to much of somebody else on her)
Just fit the new starter and see what happens then.
If it runs OK let it warm up and then give it a blast and see if what its like after that!
Then you can worry!
Andy
Cheers
Gassing Station | Wedges | Top of Page | What's New | My Stuff



