air con (T350t)
Author
Discussion

road hog

Original Poster:

2,645 posts

236 months

Saturday 25th February 2012
quotequote all
air con pump not pulling in (light on dash works)

been into menu .

cl off pr off ic on.

checked relevant fuse (no 28 ..20amp all ok)

so whats next to check..




shep1001

4,618 posts

212 months

Saturday 25th February 2012
quotequote all
road hog said:
air con pump not pulling in (light on dash works)

been into menu .

cl off pr off ic on.

checked relevant fuse (no 28 ..20amp all ok)

so whats next to check..
Out of gas/lube.? when I had a leak on my mazda, the zircon would not kick in when the gas level was too low.

sibo99

227 posts

191 months

Monday 27th February 2012
quotequote all
Prob gas or trinary safety switch

bomb

3,789 posts

307 months

Monday 27th February 2012
quotequote all
Yep............It'll need re-gassing.

Promise me you'll buck up !

rolex

3,119 posts

281 months

Tuesday 28th February 2012
quotequote all
Yep air con pump connected to the airbag on steering wheel.

Chamorange

146 posts

197 months

Wednesday 29th February 2012
quotequote all
Hi,

Had the same problem with my T350C.

Everything showed that it was working but the clutch never pulled in.

I had the car into TrackVroad and they informed me that there was a fault with the dash ecu and that it would have to be sent away and repaired.

Left it as it was as I had to drive the car back up to Scotland, but took out the ecu, sent it away and had it repaired, and now it works as it should.

If you need anymore info just let me know.

Ian

road hog

Original Poster:

2,645 posts

236 months

Thursday 1st March 2012
quotequote all
ecu ,been out and repaired (thats what the fault was last time)....


another big bill....

Zippee

13,927 posts

257 months

Thursday 1st March 2012
quotequote all
road hog said:
ecu ,been out and repaired (thats what the fault was last time)....


another big bill....
That was what stopped mine working last year. ECU sent away for repair and working air con afterwards.

road hog

Original Poster:

2,645 posts

236 months

Friday 16th March 2012
quotequote all
update.

sticking valve on pump. re-gassed and valve freed off , all working fine.