CStradale - stainless steel calipers
CStradale - stainless steel calipers
Author
Discussion

911Thrasher

Original Poster:

2,573 posts

230 months

Tuesday 28th February 2012
quotequote all
question regarding a Challenge Stradale equipped with carbon brakes: why would someone change their original calipes to steel calipers?

Any logic? Never thought original brake calipers were prone to failure or something? Is it because steel calipers are stronger? Do they wear out?

isuk

1,526 posts

247 months

Tuesday 28th February 2012
quotequote all
I presume you mean discs as opposed to calipers. Owners who use the car on track a fair bit have switched to steel discs as they are cheaper to replace than the OEM carbon set up.

911Thrasher

Original Poster:

2,573 posts

230 months

Tuesday 28th February 2012
quotequote all
oups sorry - i meant Caliper Pistons are stainless steel - discs are carbon.
and i got the answer:

its a common strad fault,the alluminium pistons corrode and stick - so the stainless steel pistons are a Hill Engineering upgrade to the original calipers

www.pistonheads.com/sales/3599881.htm

Edited by 911Thrasher on Tuesday 28th February 16:36

TISPKJ

3,780 posts

238 months

Tuesday 28th February 2012
quotequote all
Can only assume he had problems with corrosion of std ones, standard must be chrome plated at worst I would have thought, maybe he had stainless pistons made up to save buying new calipers ?

Also regarding your other post reference sub 70k CS, are you saying the seller of this one wont take 70k ?

911Thrasher

Original Poster:

2,573 posts

230 months

Tuesday 28th February 2012
quotequote all
TISPKJ said:
Can only assume he had problems with corrosion of std ones, standard must be chrome plated at worst I would have thought, maybe he had stainless pistons made up to save buying new calipers ?

Also regarding your other post reference sub 70k CS, are you saying the seller of this one wont take 70k ?
I dont know - I havent asked him how much he would take for this one if i were to lift it (cash buyer).

But yeah, regarding my other post: i dont know of any CS that would go for 70kGBP - they all seems highly priced. On the continent it is quite easy to find a good average mileage car 25-40kkm (<25kmiles) for 90/95kEuros (<80kGBP)


That got me thinking of LHD cars wink

voicey

2,494 posts

218 months

Tuesday 28th February 2012
quotequote all
I believe the original pistons are chrome plated (like the balljoints) and rust at a hint of moisture (like the balljoints).

TISPKJ

3,780 posts

238 months

Tuesday 28th February 2012
quotequote all
911Thrasher said:
TISPKJ said:
Can only assume he had problems with corrosion of std ones, standard must be chrome plated at worst I would have thought, maybe he had stainless pistons made up to save buying new calipers ?

Also regarding your other post reference sub 70k CS, are you saying the seller of this one wont take 70k ?
I dont know - I havent asked him how much he would take for this one if i were to lift it (cash buyer).

But yeah, regarding my other post: i dont know of any CS that would go for 70kGBP - they all seems highly priced. On the continent it is quite easy to find a good average mileage car 25-40kkm (<25kmiles) for 90/95kEuros (<80kGBP)

I guess it depends on your intended use as to what high miles actually are, I bought my 355 with 40k on the clock, not the lowest but again not the highest mileage car out there, I only have it as a toy and obviously do few miles so the longer I keep it the closer it will become to normal mileage.

Only reason I ask about that CS is I have been drooling over it for months and guess its no secret that it has been up for sale for what seems like a long long time (correct me if im wrong) so would think at 70 or a touch under the fella would rip your arm off no ?


That got me thinking of LHD cars wink

supersport

4,646 posts

258 months

Tuesday 28th February 2012
quotequote all
They don't do a tow bar for these do they getmecoat

911Thrasher

Original Poster:

2,573 posts

230 months

Tuesday 28th February 2012
quotequote all
supersport said:
They don't do a tow bar for these do they getmecoat
ahahhahah - unfortunately they dont do roof rack either, which will be a problem, where will i stick my surfboards, those long road trips are part of the enjoyment i get from my current RS

Ingenere

141 posts

180 months

Tuesday 28th February 2012
quotequote all
911Thrasher said:
question regarding a Challenge Stradale equipped with carbon brakes: why would someone change their original calipes to steel calipers?

Any logic? Never thought original brake calipers were prone to failure or something? Is it because steel calipers are stronger? Do they wear out?
I have a CS that I track and actually use, rather than just compete in the common Ferrari series, know as PPE (Posing, Parking and Eating).

I don't believe that there will be any problems with the calipers, if the cars are driven. As for switching out the rotors from carbon ceramic to steel, I will only do that if the costs don't come down. Replacement costs for the standard rotors are $34,000USD, or $8500USD/corner. Brembo has a direct steel rotor replacement for $1KUSD/corner


911Thrasher

Original Poster:

2,573 posts

230 months

Tuesday 28th February 2012
quotequote all
Ingenere said:
i didn't consider "grey" before, looks nice smile

Ingenere

141 posts

180 months

Wednesday 29th February 2012
quotequote all
911Thrasher said:
i didn't consider "grey" before, looks nice smile
Thanks........ that's grigio titanio! Everything sounds better in Italian!

I specifically wanted no red and no stripe.









neil-f

1,647 posts

238 months

Friday 2nd March 2012
quotequote all
As Voicey said the pistons in the calipers can sieze up due to moisture, Hill's do stainless replacement kits to solve this problem (I have no conection with this company)

moc

215 posts

240 months

Monday 5th March 2012
quotequote all
Had mine done only last week for that exactly reason, front pistons had corroded and siezed completely

. . . . and I do use mine other than just PPE as well wink

Enricogto

646 posts

176 months

Monday 5th March 2012
quotequote all
Reason number two being that if, while tracking your car, you end up in a gravel trap, the odd stone could chip the carboceramic rotor (then again the replacement cost), while this couldn't happen with classic steel rotors.

E