Top Classic Car Bodge ..
Author
Discussion

Electron

Original Poster:

605 posts

248 months

Tuesday 13th March 2012
quotequote all
I guess others have purchased a car only to get it home and discover it's been bodged ...

I knew my Gilbern was shot but didn't expect to find someone had pushed a piece of angle iron across the main rear suspension pick up points to help hold the car together ..



Anyone got anything better ..... ??

P100

639 posts

235 months

Tuesday 13th March 2012
quotequote all
I once bought an old Humber as a cheap run around....always wondered why it was so slow until it failed its MOT on rusty sills
As I removed the outer skin imagine my surprise when I found them filled with concrete !!

alsaautomotive

684 posts

229 months

Tuesday 13th March 2012
quotequote all
We're doing a Khamsin at the moment that someone had filled with expanding foam and diary pages before glassfibring over it all (& quite recently).
Al.

gingerpaul

2,929 posts

272 months

Tuesday 13th March 2012
quotequote all
From what I understand you can often tell the trade of the bodger by their method of bodging. Filled with concrete means builder, bits of wood means carpenter, buckets of filler means plasterer etc. I've only experienced the filler myself though. hehe

dartissimus

954 posts

203 months

Tuesday 13th March 2012
quotequote all
A baker's car - full of dough, sorry should be bankerrolleyes

timolloyd

229 posts

189 months

Tuesday 13th March 2012
quotequote all
Great thread. I have discovered foil in place of fuses (Mini), wings 'bonded' to the bulkhead (Mini again) and dexion in place of bits of chassis on a Herald

JAHetfield

443 posts

178 months

Tuesday 13th March 2012
quotequote all
Came across this in an old Transit at work one day. Top bodging lol


Justin Cyder

12,624 posts

178 months

Tuesday 13th March 2012
quotequote all
This thread reminds me of Minder! Arthur sells a car to someone & he brings it back the next day complaining the wings have been filled with newspaper. Arthur denies all knowledge.

- But Arthur, it's yesterday's paper!!

Major Fallout

5,278 posts

260 months

Tuesday 13th March 2012
quotequote all
timolloyd said:
Great thread. I have discovered foil in place of fuses (Mini), wings 'bonded' to the bulkhead (Mini again) and dexion in place of bits of chassis on a Herald
A bit of foil around a dead fuse has worked for my a time or two.

But always replaced ASAP.

IroningMan

10,598 posts

275 months

Tuesday 13th March 2012
quotequote all
If you put enough iron filings in your filler then it will pass the magnet test.

neutral 3

8,488 posts

199 months

Tuesday 13th March 2012
quotequote all
My best one so far has to be the K plate Fulvia an ex pal discovered in Flooot and was Totally Tucked up with...... its inner front arches were made of The Daily Wail.......

And A Former Banger Race Champion whos pal, A fellow racer, who used to fill the Chassis Rails of his Many Austin Cambridges up with Cement........

james0

330 posts

235 months

Tuesday 13th March 2012
quotequote all
After cutting open one of my old cars rotten sills I repaired the large holes with load bearing gaffer tape (probably stiffer than the rust), painted it body colour and ran it around for a while until I scrapped it.




Isimmo

1,286 posts

200 months

Tuesday 13th March 2012
quotequote all
This was the ABS relay on our quattro when we bought it in 1995...


arfur daley

834 posts

195 months

Tuesday 13th March 2012
quotequote all
Justin Cyder said:
This thread reminds me of Minder! Arthur sells a car to someone & he brings it back the next day complaining the wings have been filled with newspaper. Arthur denies all knowledge.

- But Arthur, it's yesterday's paper!!
It was a lovely motor yesterday. Now theres a free newspaper, shut the door on the way out.byebye

benjj

6,787 posts

192 months

Tuesday 13th March 2012
quotequote all
When my Grandfather brought the Series 1 Land Rover back from Africa it had a rather clever bodge.

When you looked at the bonnet there was an odd looking knot sticking up.

The bonnet catch/close device was kaput. Someone 'fixed' it by nailing a hole in the bonnet and feeding through a string. On the end of the string, inside the engine bay, was a brick.

Once it was fixed the strange engine knock on cornering was also sorted wink

Justin Cyder

12,624 posts

178 months

Tuesday 13th March 2012
quotequote all
arfur daley said:
It was a lovely motor yesterday. Now theres a free newspaper, shut the door on the way out.byebye
hehe

Plank

147 posts

295 months

Wednesday 14th March 2012
quotequote all
Last year when closely inspecting my newly bought x/19 project several areas had been repaired with blu tak covered with gaffer tape and undersealed over !!

daddyov8

77 posts

212 months

Wednesday 14th March 2012
quotequote all
when i picked up my last 924 turbo about 10 miles from where we picked it up in the middle of nowhere throttle cable snapped, managed a temp fix with a hair band, a zip tie, ,a hose clip, a screw driver bit and some trim from the seat, all sourced from in the car. realised once back at home i had in the boot of the car we went in an old toolbag full of more useful bits. never mind half an hours fiddling on a sunny day not the worst way to spend a sunday..

Yertis

19,707 posts

295 months

Wednesday 14th March 2012
quotequote all
Isimmo said:
This was the ABS relay on our quattro when we bought it in 1995...

Well it is quite an expensive relay. wink



Yertis

19,707 posts

295 months

Saturday 31st August 2019
quotequote all
Looks not too bad otherwise though?